M3933/16-23S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic components used to reduce the strength of an electronic signal. They can do so passively, meaning that they need no external power source, or actively, where they use an external power source. The M3933/16-23S is an attenuator, specifically a dual 2-stage Bessel-Thomson low-pass filter. This attenuator is designed to pass audio signals with a frequency range of 10 Hz to 4 KHz while attenuating higher frequencies.

The M3933/16-23S attenuator is a relatively simple component, consisting of two stages of two resistors each in its signal path. The signal passes through a first stage of two resistors that are in series. The signal then passes through a second stage of two resistors that are in parallel. The resistors in each stage are of the same resistance value, but the resistors in the second stage have half the resistance value of those in the first stage.

The M3933/16-23S attenuator is primarily used in audio applications since it is designed to pass low-frequency audio signals while attenuating higher frequencies. It can be used in a variety of different types of audio equipment, such as amplifiers, mixers, synthesizers, and speaker systems. It is also used in audio filters, which are circuits that are designed to pass only certain frequencies while attenuating others.

The working principle of the M3933/16-23S is relatively straightforward. When an audio signal passes through the attenuator, the resistance of the two resistors in the first stage cause the amplitude of the signal to decrease. The second stage further attenuates the signal by reducing its frequency components above 4 kHz, resulting in a lower amplitude signal at the output.

In summary, the M3933/16-23S attenuator is a simple but useful component that is used in a variety of audio applications. It is composed of two stages of two resistors each in its signal path and it is designed to pass audio signals with frequencies up to 4 kHz while attenuating higher frequencies. Its working principle is based on attenuating the signal using the resistance of the two resistors in the first stage, followed by further attenuation of higher frequencies in the second stage.

The specific data is subject to PDF, and the above content is for reference