M3933/16-54S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are components of test and measurement instrumentation which are used to reduce the strength of a signal while maintaining its quality. The M3933/16-54S is one such component and is designed for precision attenuation. It is intended for precision voltage and current measurements, power supply regulation, and some power system applications.

The M3933/16-54S consists of 0-54 dB in 1 dB steps attenuator with 50 ohm impedance over the full range of radio frequencies, from 0.1 to 500 MHz. It features a highly linear response, low distortion, low insertion loss, and minimal standing wave ratio. Due to its wide dynamic range, the M3933/16-54S is the ideal choice for radio applications spanning multiple generations and frequencies.

The operating principle behind the M3933/16-54S is that of a precision ceramic multiple-path resistive attenuator. The component employs a ferrite substrate and a combination of high-performance resistors to achieve the attenuation levels desired. The two leads of the M3933/16-54S are connected to both the input and output of a circuit, allowing the signal to be attenuated as desired. The signal can be further adjusted by means of the attenuation levels provided, making this component ideal for precise measurements.

In terms of application, the M3933/16-54S is frequently used in precision voltage and current measurements, power supply regulation applications, and power system applications. It can also be employed in radio applications, as long as the frequency range is between 0.1 and 500 MHz. Lastly, the M3933/16-54S can be used for accurately measuring signal strength, signal-to-noise ratio, and other parametric measurements.

The M3933/16-54S leverages a highly accurate multiple-path resistive attenuator and features low insertion loss, low distortion, and minimal standing wave ratio. This makes it ideal for precision voltage and current measurements, power supply regulation, or radio applications, with a frequency range of 0.1 to 500 MHz. The M3933/16-54S also enables precise measurement of signal strength, signal-to-noise ratio, and other parametric measurements.

The specific data is subject to PDF, and the above content is for reference