M3933/30-25N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are used in a wide range of applications, from engineering and scientific research to industry, defense, and telecommunications. An attenuator is a device that reduces the power of a signal by an amount known as attenuation. The attenuation may be specified for a single frequency or across a range of frequencies. The M3933/30-25N, manufactured by BT&E Technologies, is a programmable attenuator designed for high-frequency applications.

Overview

The M3933/30-25N is an 8-bit programmable attenuator, with an insertion loss of up to 3dB MAX at a frequency of 30GHz. It has a dynamic range of 25dB in 1dB steps, and is manufactured with a range of different packages to meet the needs of various applications. It is available in both commercial and industrial temperature ranges, and is designed for use in microwave and communications systems.

Application Field

The M3933/30-25N is designed for use in high-frequency applications where precise attenuation levels must be maintained. It is especially useful in RF systems, such as radio transmitters and receivers, where it can be used to ensure that the power levels of various signals are maintained within a range. It is also used in other applications such as mixers, amplifiers, and frequency modulators. Additionally, it is often used in telecommunications, signal processing, and test and measurement applications.

Working Principle

The working principle of the M3933/30-25N is based on an RC network. This network is composed of a resistor and a capacitor in series, with the capacitor typically being placed at the input port. The resistor and capacitor are connected in such a way that they form a low-pass filter. The attenuation of the signal is determined by the RC time constant; that is, the ratio of the resistance to the capacitance. The frequency response of the device is such that the higher frequencies are attenuated more than the lower frequencies.

The M3933/30-25N can be programmed to provide a range of attenuation values from 0dB to 25dB, in 1dB steps. It can be operated in a mode where the programmed value remains the same even after power cycling, or in a mode where the programmed value is reset each time power is cycled. Additionally, it has an input port and an output port, which allow it to be integrated into existing signal paths without requiring additional components.

Conclusion

The M3933/30-25N is a programmable attenuator designed for use in high-frequency applications. It provides a wide range of attenuation values with 1dB resolution, and is available in a range of packages to suit different applications. Its working principle is based on an RC network which creates a low-pass filter with a frequency-dependent attenuation profile. It can be programmed to maintain its attenuation level after power cycling, and can be easily integrated into existing signal paths.

The specific data is subject to PDF, and the above content is for reference