M675-02-ALT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that create electrical signals with a given frequency usually for radio transmissions. The M675-02-ALT oscillator is a popular choice when low cost, high accuracy, wide tuning range, and low phase noise are important. It has an operating temperature range of -25°C to 85°C and can operate at frequencies between 1MHz and 6GHz.

The M675-02-ALT oscillator is constructed using a thick film hybrid circuit and a ceramic resonator as the basis of its design. The ceramic resonator is a piezoelectric device that creates an oscillating electric signal in response to an applied voltage. It consists of a quartz crystal or a metal-oxide-semiconductor field effect (MOSFET) transistor that are cut in half at an angle. This creates a double capacitor which vibrates at a certain frequency when voltage is applied.

The M675-02-ALT oscillator uses the ceramic resonator along with a varactor diode to control the frequency of the oscillation. The varactor diode is a semiconductor diode with the ability to change its capacitance based on an applied voltage. This enables tuning of the frequency of the oscillator up to 6GHz.

The basic operating principle of the M675-02-ALT oscillator is simple. The ceramic resonator produces an oscillating electric signal and the varactor diode is then used to control the frequency of the oscillation by adjusting the capacitance. When the voltage applied to the varactor diode is increased, the capacitance of the varactor diode also increases, leading to a decrease in the resonance frequency of the ceramic resonator. Conversely, when the voltage applied to the varactor diode is decreased, the capacitance of the varactor diode decreases, leading to an increase in the resonance frequency of the ceramic resonator.

The M675-02-ALT oscillator is used in a variety of applications. It is most commonly used for frequency generation in radio communications, but can also be used for frequency synthesis in navigation systems, test and measurement applications, and aerospace systems, to name a few. Its low cost, wide tuning range, and low phase noise makes it ideal for these types of applications. It can also be used for frequency control in synthesizers, which need an accurate and consistent frequency source.

The M675-02-ALT oscillator is a popular choice when accuracy, low cost, wide tuning range, and low phase noise are important. Its thick film hybrid construction and ceramic resonator allow for easy integration into existing circuits with minimal modification, and its wide operating temperature range gives it added versatility. Its ability to precisely control frequencies up to 6GHz make it an ideal choice for frequency generation in a variety of applications.

The specific data is subject to PDF, and the above content is for reference