M675-02-AM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is essentially an electronic circuit designed to produce an alternating waveform such as sine, square, or sawtooth wave. It is such device used to generate a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators can be categorized into two types, namely, active oscillators which require an external power source to create the oscillating signal, and passive oscillators which receive power from a circuit and generate the oscillations to a certain frequency. A good example of a passive oscillator is the M675-02-AM oscillator.

M675-02-AM application field and working principle

The M675-02-AM Oscillator is a component developed with two parts: a control logic circuit and a resonator. It is designed to operate in the X-Band microwave frequency range, with IF frequencies from 10 MHz to 1 GHz, and is applicable in oscillator type, frequency modulation / amplitude modulation, amplitude modulation, and other types of radio applications. Furthermore, this oscillator is highly reliable due to its low power consumption and microstrip line matching network technology.

In terms of the working principle, the M675-02-AM oscillator works by utilizing a small analog device, usually a small insulated-gate bipolar transistor (IGBT). The IGBT is connected to a voltage controlled oscillator (VCO), which is essentially a capacitor and an inductor placed in close proximity. When a voltage is applied to the VCO, an alternating current is generated, which causes the VCO to oscillate. The frequency of the oscillation is dependent on the values of the capacitor and inductor. When the frequency of the produced signal falls in the IF band, the generated signal is then amplified and fed into an output filter to provide an output waveform with extremely low noise and distortion.

Apart from that, the M675-02-AM oscillator can be used in frequency synthesis, signal generators, and other communication and radar applications. For example, in a transmission system, it can be used to generate a signal carrier that can be modulated with data. This signal can then be amplified using a power amplifier and transmitted over the air. In addition to this, the M675-02-AM oscillator can also be used in radio receivers. In a receiver, the signal carrier generated by the oscillator can be used to demodulate various types of information from the radio waves.

In summary, the M675-02-AM oscillator is a highly reliable and efficient component developed for use in a variety of radio systems. It utilizes a small IGBT connected to a VCO to generate the desired signal. As such, it is a useful tool for use in a variety of radio applications, such as frequency synthesis, signal generation, and transmission systems.

The specific data is subject to PDF, and the above content is for reference