M74HC14RM13TR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M74HC14RM13TR is a high-performance logic chip manufactured by NXP Semiconductors, a company based in the Netherlands. It is part of the M74HC(10, 20, and 30) series, which is a family of CMOS logic devices. The M74HC14RM13TR is a hex inverting Schmitt trigger chip, with an open-drain output, meaning it can source current, but not sink it. It is most commonly used as a buffer, allowing signals to be increased or decreased in strength or frequency without changing their form.

The M74HC14RM13TR falls into the category of logic gates and inverters, due to its usage as an inverting Schmitt trigger. A Schmitt trigger is a type of logic gate used to produce a clean sharp square wave output from a noisy input signal. It is composed of two transistors, a Darlington pair, connected to form a comparator circuit. It functions by comparing the amplitude of the input voltage to the threshold voltage of the transistor, and toggling the output state if the current value is higher than the last.

The specific application field for the M74HC14RM13TR is the design of ultra low voltage and power-effective systems. It is most commonly used in applications such as digital delay timing functions, CMOS logic levels, and computer interface applications. For these applications, logic thresholds are utilized to detect a logic level and to sample the voltage level. This logic chip is used in conjunction with other digital logic to detect and prevent any noise or glitches that would otherwise compromise the system.

Aside from its buffer capabilities, the M74HC14RM13TR also offers increased power saving and cooling efficiency, allowing it to run at a much lower voltage. This can be especially useful in energy-constrained systems, such as laptop computers, mobile phones, and tablet computers where battery life is critical. Additionally, the M74HC14RM13TR is immune to static electricity and has built-in power management features which make it suitable for use in embedded systems.

In terms of usage, the M74HC14RM13TR is a fairly straight forward logic chip. It is designed to be used with a single supply voltage, and its output can be connected directly to an I/O port or an external circuit. Its trigger thresholds must be properly chosen depending on the application and the input signal, and the appropriate input impedance may be necessary to prevent noise or quick-switching in the output.

To conclude, the M74HC14RM13TR falls under the category of logic gates and inverters, is a hex inverting Schmitt trigger chip, and its primary application is ultra-low voltage and power-efficient systems. Its benefits include increased power efficiency and cooling efficiency, as well as immunity to static electricity. Finally, its usage is fairly simple, as long as the trigger thresholds are correctly chosen and the input impedance is of the appropriate value, it can provide a very reliable source of logic sampling and logic level detection.

The specific data is subject to PDF, and the above content is for reference