M74HC86M1R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M74HC86M1R is a high-speed CMOS logic device primarily used as a quad-XOR gate. It features an open-drain output that is ideal for driving high capacitive loads as well as providing low-power dissipation for digital logic circuits. The M74HC86M1R is widely used in audio and video applications, where it can provide low-distortion signal transmission and protection from interference. It is also found in automotive and industrial control applications that require high-frequency switching between logical states.

The M74HC86M1R is designed to operate between 2.7V and 5.5V and draws a typical current of 4.5mA. It has a propagation delay of 6.5ns (max). The M74HC86M1R is a single gate, logic-level, CMOS gate. The gate is made up of four identical XOR (Exclusive OR) circuits connected in tandem. In each of these XOR circuits, two signals are combined to create the output. When both inputs are the same, the output is LOW (0); when the two inputs are different, the output is HIGH (1). The exclusive-OR function can also be described as “one-or-the-other-but-not-both.”

The M74HC86M1R is widely used in audio and video applications as a digital task accelerator and signal level switch. For example, when two digital signals, audio and video, must be synchronized in order to avoid video noise and artifacts, the M74HC86M1R can be used to detect the difference in timing between the two signals and correct the timing accordingly. This is done by inverting the two signals on either side of the crossover point, thus allowing the video signal to keep up with the audio signal. This prevents the noise and artifacts caused by the timing difference.

The M74HC86M1R can also be used in automotive and industrial control circuits. In these applications, the device can be used to detect the difference between two logic states and drive the output accordingly. For example, it can be used as a logic-level contactor, where the output is used to drive a motor or other device on or off depending on the input signal. In addition, the M74HC86M1R can be used to provide noise-free switching between two states. The output signal is either a low (0) or a high (1) depending on the input signal, thus eliminating any noise caused by switching.

The M74HC86M1R is a high-speed CMOS logic device primarily used as a quad-XOR gate. Its open-drain output is ideal for driving high capacitive loads while its low power dissipation makes it ideal for digital logic circuits. The device is also used in audio and video applications as a digital task accelerator and signal level switch and in automotive and industrial control applications for driving motors and other devices. The M74HC86M1R can provide reliable noise-free switching between logic states with a propagation delay of 6.5ns (max).

The specific data is subject to PDF, and the above content is for reference