M74HC85B1R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M74HC85B1R is a member of the popular HC logic family and is a 4-bit parallel and 2-bit binary comparator integrated circuit (IC). It belongs to the logic-comparators category. It is also referred to as a multiple-input comparator and is most often used in analog-to-digital and digital-to-analog conversion applications.

The M74HC85B1R has a unique construction and operates on the principle of parallel comparison. It contains four individual input terminals and two output terminals which accept and output both analog and digital signals. This is the main advantage of the comparator as it eliminates the need for two separate converters to perform different types of conversion. The M74HC85B1R can detect simultaneous analog-to-digital and digital-to-analog conversions that occur in a variety of applications, including instrumentation, communications, and control systems.

The M74HC85B1R uses DIP-14 packaging, meaning that it can be mounted very easily onto a printed circuit board and requires less board space than other comparator ICs of a similar function. The device has a maximum rating of 5 volts and a power-dissipation varying between 300 mW to 400 mW. It uses 64-bit register architectures and can operate over a temperature range of -40°C to +125°C.

The two-bit binary comparator output of the M74HC85B1R is complimented by the 4-bit parallel comparison which is a novel feature of this IC. In this feature, the four input pins are enabled and each one can be programmed to compare its own digital or analog signal with a reference voltage. This is done by connecting the reference voltage to the terminal marked VREF. When a comparison is made between the voltages of the input pin and the reference voltage, the output from the comparator will indicate if the voltage on the input terminal is either higher or lower than the reference voltage.

The M74HC85B1R\'s 4-bit application field is limited to operation in which the reference voltage is supplied by the user, which is typically in the range from -2 volts to +2 volts. It is generally used to compare two analog signals and determine the one with the greater value. An example of this is the detection of the highest and lowest data points of a given signal to detect a crossover or back-crossover in a switching process.

The working of the M74HC85B1R comparator IC is determined by the 4-bit parallel comparison function. When a comparison is made between two variables, the output signals of the comparator will become either logic ‘high’ or logic ‘low’. The logic ‘high’ signal indicates that the voltage of the input pin is higher than the reference voltage, and logic ‘low’ is indicative of the voltage being lower than the reference voltage.

The M74HC85B1R is a versatile comparator IC that can be used in a wide range of applications. It can accurately detect changes in analog-to-digital and digital-to-analog conversions, and its 4-bit parallel comparison function provides a unique capability for determining the greater value between two signals. The device is easy to mount and requires minimal board space, and the two-bit binary comparison output makes it the ideal choice for applications where accuracy is essential.

The specific data is subject to PDF, and the above content is for reference