M74HC540B1R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

M74HC540B1R is a logic product which falls under the category of Logic - Buffers, Drivers, Receivers and Transceivers. It is a hex open-drain inverting octal buffer/line driver with 2-state outputs. It has an operating voltage of 2 V to 5.5 V and a current of 5mA, maximum. The product is characterized for low noise, low power and low distortion. The device can be used to reduce the impedance and improve the continuity of the signals travelling through it.

In terms of the application field for the M74HC540B1R, the product can be used for interfacing between 5 V TTL and CMOS, performing fan-outs in high speed bus lines, providing buffers between low current input and higher current output stages and converting current-mode signals to voltage-mode signals. The product is also well-suited for applications in areas where noise is a primary factor.

In terms of its working principle, the M74HC540B1R hex open-drain inverting octal buffer/line driver is designed with open-drain outputs, enabling it to interface with out-of-phase digital systems. The device is designed to prevent any shorting of output to input and logic inputs are operable down to 1.5 V, allowing the device to work with both standard TTL and CMOS Logic systems. A single output will sink up to 16mA and all 12 outputs can be sunk together to 50mA. The inputs are protected from over-voltage conditions of up to VDD + 0.5V and are ESD protected.

The M74HC540B1R is also equipped with Schmitt triggers providing easier system interfacing. The device features very fast noise margin edges over which all inputs travel, preventing noise from disturbing the device performance, thus making it a preferred choice for an EMI, RFI, and ESD sensitive environment. It also features a very low input leakage current and low power consumption, making it a good choice for battery powered applications.

In terms of outputs, the device comes with Bus Hold that eliminates the need for external pull-up/pull-down resistors and it also provides a guaranteed valid logic level latch-up free against slow input voltage transitions. It is also designed with a priority logic which no other manufacturer has, allowing priority interrupt logic and these priority logic output can be used directly to provide priority encoding.

The M74HC540B1R is a versatile product and is ideal for connecting digital systems that have high frequency operational requirements. The product provides both high speed and reliability, making it a preferred choice for a wide range of applications. It also gives the user flexibility to configure the product for interfacing between both standard TTL and CMOS logic inputs and outputs.

The specific data is subject to PDF, and the above content is for reference