M74HC623B1R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M74HC623B1R is a device belonging to the family of logic integrated circuits designed and developed by ST Microelectronics. This device can be classified under the Logic category of Buffers, Drivers, Receivers and Transceivers. It is an 8-bit parallel-load, dual 8-channel multiplexer with 3-state output registers.

The M74HC623B1R device is available in several packages; SO14 and ST14 are the most common, although other options are available. It has the same features and features as other M74HC623B1R devices and is fully compatible with IEEE standard 8-bit buses. The power supply voltage is from 2V to 6V, and it has a nominal power dissipation of 2W. It has a low power consumption of 0.2 μA.

The M74HC623B1R is a logic chip that is usually used as a multiplexer. It provides a way to select two of the eight inputs and route it to the single output. This enables selecting between two different sets of data. The device is designed to minimize crosstalk and distortion. The input is active-low and the output is open-drain, allowing for easy interfacing with other logic devices.

The multiplexer has several applications. One of the most popular and useful is for switching analog signals, allowing for the selection between two sets of data. It can also be used for selecting between multiple data sources, such as multiple cameras, or multiple sensors. It is also suitable for real-time data routing, where data needs to be routed quickly to the right place.

The device also has the ability to store data, thus acting as a register. It can store up to eight bits of data and provide them as an output when needed. It can also be used to 1) buffer a signal, 2) convert an analog signal to digital and vice-versa, and 3) to control the speed of a signal.

The M74HC623B1R device\'s working principle is simple and straightforward. It takes in two 8-bit parallel-loaded data sets and multiplexes them, selecting one data set to be output. The device has a latch control line which is used to store data. When the latch is ‘1’, data will be stored and when it is ‘0’, the data will be changed. The device also has clock and reset pins which can be used to control the synchronization of the data. When the clock is active, data will be output in a continuous manner.

Overall, the M74HC623B1R is a reliable, versatile and powerful device. With its wide range of applications and its simple working principle, it is a great choice for any project requiring a multiplexer with digital logic. It is capable of handling both analog and digital data and is able to store up to eight bits of data at a time, making it ideal for a variety of applications.

The specific data is subject to PDF, and the above content is for reference