M74HCT125TTR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

M74HCT125TTR is one of the popular logic devices available in the market. It is a part of the M74H family of logic circuit that has its applications in the field of digital logic and analog electronics.

The M74HCT125TTR is a quadruple bus buffer gate with three-state outputs. It is designed to provide high-speed buffering of digital signals between 3-state buses and the inter-connection between logic blocks. The device is designed with a wide range of input protection characteristics and it is designed to provide high-speed buffering with lower pin-count and low ground bounce noise.

M74HCT125TTR are with open drain outputs, which have standard outputs as well as tristate outputs. The output stage has a 4-bit open drain bus structure. When the device is in high-impedance state, the output transistor is off and there is no current flow between the output and ground. In logic low state, the output transistor is turned on and current is flowing from the output to ground.

Working Principle:

The M74HCT125TTR is a quad-driver with an open-drain output stage. It works in a simple manner. When the device is enabled, it acts as four independent bus drivers. For each of the four buffers, there are two input terminals and one output terminal. The data to be transferred from one bus to the other is applied to the input of the driver and the data is output from the output terminal of the driver.

The output stage of the M74HCT125TTR consists of four open drain N-Channel field effect transistors (NFETs), one for each output. These NFETs are connected in a push-pull configuration. In addition, each NFET has its output fed to a resistor, which sets the output’s maximum current capability. When the device is enabled, this resistor is of low value, which results in a high-current drive on the output.

The open drain output stage of the M74HCT125TTR also provides an additional feature. When one of the outputs is in a high-impedance state, the current consumption of the device drops drastically. This is achieved through the use of an open drain output stage, wherein all four outputs are connected to the same output terminal. When one of the outputs is in a high-impedance state, no current flows through that output and the current consumption of the device is drastically reduced.

Applications:

The M74HCT125TTR are used in many areas of digital systems, including Power Management, Bus Arbitration, Peripheral Interfaces and Data Processing systems. The device can be used as a bridge between two digital buses in different sections of a digital system, which require the data to be multiplexed between them.The device is also used for driving data signals to address decoders, switches, multiplexers and counters, as well as for creating logic networks for digital logic function expansion in microcontrollers, FPGAs and other digital circuits by producing logic states and signaling between logic modules.

The open-drain output stage of the device makes it ideal for multiplexed data and address signals, as well as low-power output signals. The device can also be used in 3-state buses driven by high-current signals, and the high-current push-pull output stage makes it suitable for driving large capacitive loads. In addition, the device can be used in combination with logic switches to provide a low-power, low-capacitance solution for data signal buffering and signal shape interpolation.

In summary, the M74HCT125TTR is a highly useful logic device with a wide range of applications in digital systems. Its open-drain output stage reduces the current consumption when the device is in a high-impedance state, making it ideal for low-power applications. Combining this device with other logic devices can expand digital logic functions and provide many creative solutions for digital systems.

The specific data is subject to PDF, and the above content is for reference