M74HCT374B1R

Max Propagation Delay @ V, Max CL:	38ns @ 4.5V, 150pF
Base Part Number:	74HCT374
Package / Case:	20-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 125°C (TA)
Input Capacitance:	5pF
Current - Quiescent (Iq):	4µA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Output High, Low:	6mA, 6mA
Trigger Type:	Positive Edge
Series:	74HCT
Clock Frequency:	50MHz
Number of Bits per Element:	8
Number of Elements:	1
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Standard
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops

The M74HCT374B1R is a low-power Octal D-Type, Flip-Flop integrated circuit from ON Semiconductor. It contains 8 D-type registers in a single 16-pin dual-inline package. Each register has an asynchronous master reset input, and can operate from +2.0V to +5.5V VCC. The M74HCT374B1R is aimed at systems requiring registered digital information in multiplexers, counters, frequency dividers, and flip-flop applications.

M74HCT374B1R Application Fields

The M74HCT374B1R is a logic device used in multiplexer, counter, frequency divider and flip-flop applications. It is used in applications such as logic logic gates and memory circuits. It can also be used in analog-to-digital and digital-to-analog converters, pulse width modulators, signal processors, and signal conditioning applications.

Working Principle

The M74HCT374B1R provides 8-bit D-Flip-Flops with a single master reset. D inputs are enabled when the clock (CP) is low and transparent when the clock is high, thus allowing data to be transferred from the D input to the Q output under the control of the CP. The Q output may be fed back to the D input and is clocked by the CP rising edge. The master reset input (MR) zeroes all the Q outputs.The working of the M74HCT374B1R integrated circuit is based on a simple logic that dictates the state of the output pins (Q) depending upon the state of the input pins (D and CP). The output state is either high or low and changes only when the CP input pin is active and the corresponding D input state is also active. The state of the output pins also remains unchanged, regardless of the state of the other input pins, when the clock (CP) is not active. The MR input pin is used to reset the output pins to zero.

Conclusion

The M74HCT374B1R is a low-power Octal D-Type, Flip-Flop integrated circuit from ON Semiconductor with 8 D-type registers. It is used primarily in multiplexer, counter, frequency divider, and flip-flop applications. The primary input pins of the M74HCT374B1R are D and CP, with an asynchronous master reset (MR) input for resetting the outputs. The logic that dictates the working of the M74HCT374B1R is based on the state of the D and CP pins, and the MR pins are used for resetting the Q outputs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description