M7685-46

Series:	M76
Packaging:	Bulk
Part Status:	Active
Type:	Closed Top, Grip
Gender:	Female Sockets
Number of Positions or Pins (Grid):	2 (1 x 2)
Pitch:	0.100" (2.54mm)
Height:	0.394" (10.00mm)
Contact Finish:	Tin
Contact Finish Thickness:	118.1µin (3.00µm)
Color:	Red

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M7685-46 is a kind of equipment used to measure the electromotive force of a given electrical system. It is classified as both a shunt and jumper. It serves two primary functions - measuring and monitoring electrical current, and serving as a jumper to protect electrical circuits from short circuit failures.The shunt is composed of two main parts, a bar (or bridge) and a sensing element. The bar is connected to the electrical circuit across which the current flow is to be measured. The sensing element is connected to the shunt at a point between the bar and the circuit board. The element transforms a small amount of the current into a measurable output. This output is then used to either measure or monitor the current flow of the circuit.The jumper is another component of the M7685-46. The jumper is connected between two PCBs (Printed Circuit Boards) in order to prevent a single board from drawing too much current and potentially causing a short circuit. When a current passes through the jumper it will automatically de-energize the PCB, providing the added layer of protection to prevent damage.Aside from its obvious uses of measuring electrical current and providing short circuit protection, the M7685-46 can also be used in the protection of DC-DC converters. A short circuit can cause the converter to draw an excessive amount of current that will damage or destroy the converter. By connecting a jumper between the converters and the M7685-46, the converter can be protected from any potential short circuits or surges. It is important to note that the jumper should only be used when the power switch is in the “off” position.The M7685-46 has a built-in time delay feature that can be customized depending on the application. This time delay feature can prevent the M7685-46 from powering the system before it has a chance to warm up and stabilize. This will ensure that the system will stay properly powered and will not suffer any unexpected power-offs.In conclusion, the M7685-46 shunt and jumper is a useful tool for measuring and monitoring electrical current, providing short circuit protection, and protecting DC-DC converters. With its customizable time delay feature, the M7685-46 can provide reliable and efficient power when utilized in the right application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description