MAPD-009918-C209C0 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF power dividers or splitters are essential pieces of equipment used in a wide range of radio frequency (RF) applications. They are used as signal combiners or directional couplers, to split signals and redistribute power to multiple transmission lines to enable multiple receivers. The MAPD-009918-C209C0 is a type of RF power divider/splitter that is used to distribute power between a single transmit path and multiple receive paths. It is designed to have very low insertion loss over a wide bandwidth with excellent return loss.

The MAPD-009918-C209C0 is a three port 6-port power divider/splitter that can be used to distribute RF power between a single transmit path and six receive paths. It is designed to have low insertion loss and excellent return loss. It is also designed to have high isolation between the transmit and receive paths to reduce interference. The power divider/splitter can be used with a wide range of frequencies from 150MHz up to 6GHz, making it suitable for a variety of wireless applications.

This type of power divider/splitter works on the principle of reciprocal splitting of the electric fields of the incoming signal. The signal is split into two half-wave segments, each of which is then split into two 90 degree sections. The resulting four sections are then combined in a splitter circuit to yield the desired power distribution. The power divider/splitter has four distinct ports, one for the input and three provide the output. The main objective of the power divider/splitter is to split the incoming signal into multiple equal output signals.

The MAPD-009918-C209C0 is a highly versatile device that can be used in a variety of RF applications. It can be used to split a single transmit signal into multiple receive signals for wireless communication systems such as Wi-Fi and Bluetooth. It can also be used as a splitting device to provide input signals for multiple receivers. It can also be used to combine multiple input signals into a single output signal. The power divider/splitter provides a low-cost solution for splitting signals in a wide variety of wireless applications.

In addition to its primary use as a signal splitter or combiner, the MAPD-009918-C209C0 can also be used in other applications such as antenna matching, good rejection of interfering signals, and increase the gain of multiple receivers. It can be used to increase system sensitivity, which is especially useful in applications such as wireless surveillance systems. The power divider/splitter can also be used to distribute power between multiple receivers. It can also be used in end-to-end signal processing, allowing multiple receivers to independently process signals without interference.

The MAPD-009918-C209C0 is a reliable, efficient, and cost-effective RF power divider/splitter. It is ideal for a variety of wireless applications and provides a low cost solution for splitting signals. It is also designed to have low insertion loss and excellent return loss with high isolation to reduce any signal interference. Its wide range of frequency coverage makes it suitable for a variety of applications from 150MHz up to 6GHz.

The specific data is subject to PDF, and the above content is for reference