MAPD-011027 RF/IF and RFID

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Insertion Loss:	4.6dB
Frequency:	5MHz ~ 1.5GHz
Specifications:	--
Size / Dimension:	--
Package / Case:	8-SMD, No Lead

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RF Power Dividers/Splitters

RF power dividers/splitters are components used in telecommunications, wireless communication, broadcasting, and other radio frequency (RF) applications. They can be used to divide, combine, or route an RF signal over multiple paths. The RF power dividers/splitters are used to equalize the power of transmitted signals over the multiple branches of a signal-processing system. RF power dividers/splitters can also be used in antenna systems for signal transmission and reception, by dividing the input signals to individual transmitters or combining the signals received from multiple receivers to a single output. This article will discuss the application fields and working principle of a MAPD-011027 RF power divider/splitter.

Application Fields of MAPD-011027 Power Divider/Splitter

The MAPD-011027 is a high performance, low loss, and wide band RF power divider/splitter. It is designed for use in the frequency range of 5.8 GHz to 26.5 GHz. This device boasts a nominal isolation of 30dB, a maximum SWR of 2.1 for all ports, and can handle up to 2 watts of power. This makes it ideal for use in Wi-Fi routers, cell phone base stations, GPS receivers, and other wireless communication systems. The MAPD-011027 can be used for signal transmission between outdoor and indoor components of a telecom or broadcasting system, or for distributing an RF signal among many branches in a system. It can also be used for antenna combining, for the synchronous reception of multiple signals in a single antenna. The MAPD-011027 is manufactured to be environmentally friendly, durable, and has a low profile. It is also suitable for low-band VHF applications, making it a cost-effective, reliable choice.

Working Principle of MAPD-011027 Power Divider/Splitter

The MAPD-011027 is a three-port RF power divider/splitter that can separate one frequency-division multiplexing (FDM) signal into two signals. It typically uses an amplifier, a hybrid junction, a filter or duplexer, and a resistor to convert a multiplexed signal into two separate signals. The amplifier is used to amplify the received signal. The hybrid junction is often a four-port device which combines two signal paths into one signal path, as well as separating a single signal into two paths. The filter or duplexer is used to filter out unwanted frequencies. Then, the resistor acts as a voltage divider and splits the signal into two components to the two output ports. The MAPD-011027 is typically designed with high isolation to enable simultaneous receive and transmission of signals. This allows different signals with different frequencies to be send or received on the output ports without interference with one another.

Conclusion

The MAPD-011027 is an ideal device for use in high-performance RF applications in the frequency range of 5.8 GHz to 26.5 GHz. It is designed to be used in Wi-Fi networks, cellular phone systems, GPS receivers, and many other wireless areas. It has a nominal isolation of 30dB, a maximum SWR of 2.1 for all ports, and can handle up to 2 watts of power, making it a great choice for powering a system. This device uses an amplifier, hybrid junction, a filter or duplexer, and a resistor to separate an input FDM signal into two output signals. It maintains high isolation between the two separate signals so that they can be received or transmitted at the same time without interfering with one another. This device is an environmentally friendly, durable, and low-profile choice that also makes it suitable for low-band VHF applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description