Allicdata Part #: | MAPM-020512-040C01-ND |
Manufacturer Part#: |
MAPM-020512-040C01 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | M/A-Com Technology Solutions |
Short Description: | MODULE HYBRID 20-512MHZ |
More Detail: | RF Amplifier IC |
DataSheet: | MAPM-020512-040C01 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are components that amplify electromagnetic waves or radio frequency current within a specific range. They are commonly used in military, commercial, and consumer electronics. The MAPM 020512-040C01 is specifically designed for use in RF amplification applications. In this article, the application field and working principle of the MAPM-020512-040C01 will be discussed.
The MAPM-020512-040C01 is a high-power amplifier specifically designed for use in radio frequency applications, ranging from 200 MHz to 4 GHz. It is designed with state-of-the-art gallium arsenide semiconductor technology, allowing it to operate in temperatures up to 70°C. The amplifier is capable of delivering up to 13 dB of linear gain with a peak power output of 25 W. It is well-suited for applications that require a high level of performance and reliability, such as satellite communications, mobile networks, imaging systems, and avionic systems.
The MAPM-020512-040C01 is a highly integrated amplifier, designed to operate in either the linear or non-linear mode. In the linear mode, the amplifier achieves further gains through various signal processing techniques, such as automatic gain control (AGC) and equalization. AGC is used to adjust the amplifier\'s gain in order to maintain a constant output level, while equalization is used to reduce distortion by pre-distorting the input signal to compensate for non-linear effects. In the non-linear mode, the amplifier operates at its highest gain and power output, allowing it to be used in a wide variety of applications.
The working principle of the MAPM-020512-040C01 is based on the principle of direct conversion. Direct conversion is a type of technology that allows the conversion of an RF signal into a DC current without the need for frequency conversion. In the MAPM-020512-040C01, the RF signal is first filtered and amplified, and then the amplified signal is provided to the input of a rectifier circuit, which generates a DC current. This DC current is then passed through a bias network and a set of resistors before finally being provided to the device\'s output stages. The output stages convert the DC current back into an amplified RF signal, which is then provided to the device\'s output terminals.
The MAPM-020512-040C01 is an ideal solution for applications that require a high level of performance and reliability. It is designed to operate in either the linear or non-linear mode, allowing it to be used in a wide variety of applications. Furthermore, its feature set and comprehensive documentation make it easy to integrate into any system. As such, it provides a viable solution for any application that requires a high-power amplifier.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MAPM-020512-010C00 | M/A-Com Tech... | 0.0 $ | 1000 | MODULE HYBRID 20-512MHZ 1... |
MAPM-020512-040C00 | M/A-Com Tech... | 0.0 $ | 1000 | MODULE HYBRID 20-512MHZ 4... |
MAPM-020512-040C01 | M/A-Com Tech... | 0.0 $ | 1000 | MODULE HYBRID 20-512MHZRF... |
MAPM-030400-010C00 | M/A-Com Tech... | 0.0 $ | 1000 | MODULE HYBRID 30-400MHZRF... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...