MASMLJ14CA/TR Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes, sometimes referred to as Transient Voltage Surge Suppression Diodes, are devices that protect against transient voltage spikes in electronic circuits. The MASMLJ14CA/TR is a type of TVS diode that can limit peak voltages to a safe level, thus preventing damage to the device into which it is connected. As a relatively cheap solution to electronic over-voltage protection, these devices are commonly used in a variety of auto, computer, telecommunications, consumer electronics and other industrial applications.

The MASMLJ14CA/TR is a bidirectional, axial-leaded, unidirectional Transient Voltage Suppression Diode with a wide voltage range of 14 volt. The diode structure is composed of two p-n junctions connected in parallel, and each junction is oriented in the opposite direction. This allows the device to provide over-voltage protection in both directions. The MASMLJ14CA/TR is designed to dissipate power up to 600W at a junction temperature of 150°C.

The MASMLJ14CA/TR’s primary application is to protect electronic devices from transient over-voltages caused by ESD, lightning and other electrical transients. Its fast response time and low clamping voltage make it ideal for use in sensitive microcontroller circuits. Also, the low capacitance of this diode helps reduce signal degradation in high-speed applications.

The working principle of the MASMLJ14CA/TR is simple. When exposed to an over-voltage event, the TVS diode’s two junctions become forward-biased. This allows the diode to conduct current from the source to ground, clamping the over-voltage levels to a safe level. The peak current to be clamped is determined by the diode’s power rating. The energy that is dissipated by the diode is equal to the sum of the clamping voltage and the peak current multiplied by the time duration of the over-voltage exposure.

The MASMLJ14CA/TR is an ideal solution for protecting sensitive electronics devices against transient over-voltages. Its bidirectional design, low footprint, and low clamping voltage make it perfectly suited for automotive, computer, consumer electronics, and other industrial applications. Due to its low capacitance and fast response time, the diode helps reduce signal degradation and protect sensitive microcontroller circuits and other high-speed circuits.

The specific data is subject to PDF, and the above content is for reference