MAX202CPE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX202CPE+ is an RS-232 driver/receiver interface IC developed by Maxim Integrated. It has a few applications and is mainly used in connection with TTL-level UART systems. This article will discuss the application field and working principle of the MAX202CPE+.

Applications of the MAX202CPE+

The MAX202CPE+ is mainly used in TTL-level UART systems. It is used to drive RS-232 signals from TTL logic levels and receives RS-232 signals and converts them to TTL logic levels. It is suitable for point-to-point applications and is useful for applications where the transmission length is limited. In addition, it can also be used in DTE/DCE systems and data modems. The device is capable of operating at baud rates of up to 115,200 bits per second, and is compatible with various PC and PC-compatible systems.

Working Principle of the MAX202CPE+

The MAX202CPE+ is a complete Interface IC that consists of two line drivers and two line receivers. The drivers consist of two independent, push-pull device amplifiers. The output of these amplifiers is voltage-controlled and is suitable for the modem. The two line receivers are full-wave rectifiers and the input of these receivers are compatible with low-power bipolar transceivers. The IC is designed to operate on a single +5V power supply and features an on-chip charge pump for 5V operation.

The MAX202CPE+ also features an advanced ESD protection which helps to protect the IC from any potential ElectroStatic Discharge (ESD). It also has an integrated driver-disable mode, allowing for modulation rates up to 1 Mbps without the need for additional pull-down resistors. Lastly, the IC features an enable/disable control logic, which allows for the disabling of communication lines, thus reducing power consumption.

Conclusion

In conclusion, the MAX202CPE+ is an RS-232 driver/receiver interface IC developed by Maxim Integrated. It is mainly used in TTL-level UART systems and is suitable for point-to-point applications. The device is capable of operating at baud rates of up to 115,200 bits per second and it features an integrated driver-disable mode, an on-chip charge pump, and an advanced ESD protection. Moreover, it has an enable/disable control logic, which allows for the disabling of communication lines, thus reducing power consumption.

The MAX202CPE+ is an effective and reliable device, and can be used in various applications such as DTE/DCE systems and data modems, making it a popular choice for UART systems.

The specific data is subject to PDF, and the above content is for reference