MAX211CDB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX211CDB is an 8-bit line driver, receiver, and transceiver for digital data communications on multipoint bus cable. This device allows bidirectional transmission of data over a single communications bus or line. The device is especially useful in applications that require point-to-point communications between computers or between computers and peripheral devices.

The MAX211CDB combines an 8-bit line driver, a 8-bit differential line receiver, and an 8-bit transceiver. The line driver converts 8-bit parallel data into 8-bit differential outputs, while the line receiver converts 8-bit differential inputs into 8-bit parallel data. The transceiver provides level shifting and voltage inverting of the data and control signals.

The MAX211CDB features three basic operating modes: Data Transmit, Data Receive, and Hi-Z (high impedance) Data Transmit. In the Data Receive mode, data is input to the line driver through the 8-bit parallel output port. In the Data Transmit mode, data is output to the line receiver through the 8-bit differential input port. In the Hi-Z Data Transmit mode, all 8-bits of data are transmitted in parallel over the line driver, but the data is held in a high-impedance HiZ state, allowing data to be written to and read from the line driver without interfering with the receiving device. This mode is useful for bi-directional communication over the same communications bus.

The MAX211CDB has a few additional features to enhance its performance. The device has an active-low read enable pin that can be used to control the flow of data. It also has a power-up reset pin that can be used to reset the line driver in case of an unexpected power-cycle. Finally, the device has an active-low enable pin that can be used to enable/disable the transfer of data between the line driver and the line receiver.

The MAX211CDB line driver is well suited for applications that require reliable, fast, and error-free digital transmissions. The line driver is especially useful in applications that involve real-time data transmissions, such as in industrial automation and control, where data is constantly changing and must be inspected in real time. The MAX211CDB can also be used in applications where point-to-point communications are required, such as in automotive navigation systems.

The MAX211CDB line driver can be used in a wide array of applications. It is compatible with most bus architectures, including SPI, I2C, UART, and I2S. The device is an ideal solution for applications that involve low-power, low-noise, low-volatility, and high-speed data communications. Its excellent noise immunity and high immunity to external noise also make it a great choice for applications in harsh or noisy environments.

The specific data is subject to PDF, and the above content is for reference