Allicdata Part #: | MAX208EENG-ND |
Manufacturer Part#: |
MAX208EENG |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Maxim Integrated |
Short Description: | IC TXRX RS-232 W/CAP 24-DIP |
More Detail: | 4/4 Transceiver Full RS232 24-PDIP |
DataSheet: | MAX208EENG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Type: | Transceiver |
Protocol: | RS232 |
Number of Drivers/Receivers: | 4/4 |
Duplex: | Full |
Receiver Hysteresis: | 500mV |
Data Rate: | 120Kbps |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Through Hole |
Package / Case: | 24-DIP (0.300", 7.62mm) |
Supplier Device Package: | 24-PDIP |
Base Part Number: | MAX208 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
MAX208EENG is a kind of interface driver and transmitter. MAX208EENG\'s application field lies in LCD and CRT display interface, AD converter interface control, UART interface control and accompanying control interface. It provides two unified modes, open-collector mode and totem-pole mode, which makes it be able to drive loads perfectly.
MAX208EENG has a power voltage range between 4.5V and 5.5V and its operating temperature range is between -40℃ and 85℃. In the open-collector mode, its output low voltage is rated at 0.4V. Its fall and rise time are both at 8nsmax. Its output high voltage is rated at Vcc minus 0.4V. In the totem-pole mode, its output high voltage is rated at Vcc minus 0.2V and its output low is rated at 0.2V.
MAX208EENG\'s output feature gives with its bi-directional TTL/CMOS logic compatibility. It is designed to improve the current to Vcc and reliability under fault conditions, over-voltage protection pin, and ESD clamp-diode structures for USB-Typ.C application. It supports hot-plugging and can sure that the line voltage be maintained at intelligible level during connection and disconnection.
The working principle of MAX208EENG is that it senses connection and disconnection through the monitoring of the voltage levels of the interface and keeps the line voltage within the range of acceptable values. The use of kinetic and thermal energy is the best way to understand the working principle of MAX208EENG. During connection and disconnection, kinetic and thermal energy are applied which generates the voltage and current in the circuit, respectively. MAX208EENG takes advantage of this energy and converts it into a current that is fed to the interface. In this way, by sensing the connection and disconnection, it preserves the communication interface as well as reduces the programming time.
MAX208EENG is typically used for LCD and CRT display interface Control, AD Converter interface Control, UART interface Control and Accompanying Control. In addition, the use of MAX208EENG for monitoring the connection and disconnection of the interface also helps to minimize the power consumption and reduce cost.
Overall, MAX208EENG is an excellent interface driver and transceiver device. It has wide application where low power consumption and reliable performance are desired. Its working principle is also very simple and straightforward. With its many features, MAX208EENG makes it a great option for driving loads perfectly.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MAX2640EUT+T | Maxim Integr... | -- | 2500 | IC AMPLIFIER ULTRA-LN SOT... |
MAX2686EWS+T | Maxim Integr... | -- | 2091 | IC AMP GPS/GNSS LN 4WLPRF... |
MAX2634AXT+T | Maxim Integr... | -- | 2500 | IC AMP LOW NOISE AUTO RKE... |
MAX2654EXT+T | Maxim Integr... | -- | 4871 | IC AMP LOW NOISE SC70-6RF... |
MAX2643EXT+T | Maxim Integr... | 2.64 $ | 1618 | IC AMP SIGE 900MHZ LN SC7... |
MAX2687EWS+T | Maxim Integr... | 0.9 $ | 1957 | IC LNA GPS/GNSS 4WLPRF Am... |
MAX2644EXT+T | Maxim Integr... | 3.26 $ | 4003 | IC LNA 2.4GHZ SIGE HI-IP3... |
MAX2027EUP+D | Maxim Integr... | 6.63 $ | 99 | IC AMP VAR GAIN 20-TSSOPR... |
MAX2373ETC+ | Maxim Integr... | 2.26 $ | 195 | IC AMP LNA STEP ATTEN 12T... |
MAX2640EUT+ | Maxim Integr... | -- | 118 | IC AMPLIFIER ULTRA-LN SOT... |
MAX2616ETA+T | Maxim Integr... | 2.14 $ | 1386 | IC LINEAR BROADBAND AMP 8... |
MAX2633EUT+T | Maxim Integr... | -- | 2500 | IC AMP GP VHF-MICROWAVE S... |
MAX2691EWS+T | Maxim Integr... | 1.89 $ | 4250 | IC LNA GPS/GNSS 4WLPRF Am... |
MAX2611EUS+T | Maxim Integr... | 0.57 $ | 2500 | IC AMP LOW NOISE SOT143-4... |
MAX2630EUS+T | Maxim Integr... | 1.17 $ | 4456 | IC AMP VHF-MICROWAVE SOT1... |
MAX2265EUE+ | Maxim Integr... | 4.34 $ | 191 | IC AMP POWER CELL 16TSSOP... |
MAX2640AUT+T | Maxim Integr... | 2.14 $ | 4938 | IC AMP SIGE ULTRA LN SOT2... |
MAX2233EEE+T | Maxim Integr... | 3.54 $ | 4419 | IC AMP POWER 900MHZ 16QSO... |
MAX2693LEWS+T | Maxim Integr... | 1.23 $ | 1485 | IC RF LNA GPS/GNSS 4WLPRF... |
MAX2065ETL+ | Maxim Integr... | 12.12 $ | 152 | IC A/D VGA 50MHZ-1000MHZ ... |
MAX2613ETA+T | Maxim Integr... | 2.14 $ | 3924 | IC LINEAR BROADBAND AMP 8... |
MAX2092ETP+ | Maxim Integr... | 11.09 $ | 357 | IC RF AMP 700MHZ ~ 2.7GHZ... |
MAX2614ETA+T | Maxim Integr... | 2.14 $ | 2015 | IC LINEAR BROADBAND AMP 8... |
MAX2694EWS+T | Maxim Integr... | 1.04 $ | 2455 | IC RF LNA GPS/GNSS 4WLPRF... |
MAX2679ENS+T | Maxim Integr... | 0.58 $ | 1877 | LOW NF (0.98DB) GPS LNARF... |
MAX2695EWS+T | Maxim Integr... | 0.96 $ | 4934 | IC RF LNA WLAN/WIMAX 4WLP... |
MAX2692EWS+T | Maxim Integr... | 0.96 $ | 2552 | IC RF AMP WLAN/WIMAX LN 4... |
MAX2612ETA+T | Maxim Integr... | 0.99 $ | 2500 | IC LINEAR BROADBAND AMP 8... |
MAX2689EWS+T | Maxim Integr... | 0.83 $ | 4985 | IC LNA GPS/GNSS 4WLPRF Am... |
IC transceiver Automotive Local Intercon...
LIN Transceiver Automotive System Basis ...
IC TRANSCEIVER 1/1 8SOIC,AEC-Q100
IC TXRX MULTIRATE 16BIT 208-BGA1/1 Trans...
IC TXRX CAN HS 5.25V 8-SOIC1/1 Transceiv...
IC CAN TRANSCEIVER HS 8-SOIC1/1 Transcei...