MAX2119CTI+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX2119CTI+T is an integrated circuit (IC) belonging to the class of RF Misc ICs and Modules, designed for use in a variety of applications. The chip is a duplexer, capable of receiving signals at one frequency and sending them out at another. The device combines a receive antenna, a transmit amplifier, a bandpass filter, a switch, and a switch driver.

The duplexer acts as a signal multiplexer, which combines two functions into a single unit. This is accomplished by providing separate inputs and outputs for the transmit and receive signals. By connecting two separate transmit and receive antennas, the device can send and receive signals in both directions. The difference between the transmit and receive signal frequencies can range from a few megahertz up to several gigahertz, depending on the application.

The maximum gain of the device is 31 dB, and its noise figure is 0.7 dB. The device is capable of handling up to 6 watts of input power while operating over a temperature range of -40 to +85 degrees Celsius. The device is designed with a supply voltage range of +5 to +30 V.

In operation, the device receives the incoming signal and passes it through the bandpass filter. The desired frequency is then amplified and sent to the antenna. The amplified signal is then transmitted through the antenna. The signal is received at the other end, and the same process is repeated in reverse.

The bandpass filter used in the duplexer is designed to reduce signals outside the desired frequency range. This helps to reduce interference from other signals and helps to improve the signal-to-noise ratio. The amplifier also helps to improve the receive and transmit signal quality. The switch is used to select either the transmit or the receive signal, depending on the application.

The MAX2119CTI+T is suitable for a wide range of applications including cellular phones, cordless phones, two-way radios, and data links. It can also be used in radio trunking, satellite uplinks, satellite receive systems, radar systems, and satellite communications.

In summary, the MAX2119CTI+T is an integrated circuit belonging to the RF Misc ICs and Modules class. It is a duplexer designed for use in a variety of applications including cellular phones, cordless phones, two-way radios, and data links. It combines a receive antenna, a transmit amplifier, a bandpass filter, a switch, and a switch driver. The device is capable of handling up to 6 watts of input power while operating over a temperature range of -40 to +85 degrees Celsius, and its maximum gain is 31 dB with a noise figure of 0.7 dB.

The specific data is subject to PDF, and the above content is for reference