MAX211IDBRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX211 Data Receiver and Transceiver is a family of extremely low power, full-duplex, CMOS transceivers. It operates from a single 2.5 V to 5.5 V supply, and is ideal for applications with battery powered, medium to high-speed data communications.

MAX211 is used for applications like Digital TV Tuners, PCS/GSM Base Stations, Video Conferencing, Video Cameras, and Mobile Communications Systems. It can operate as both a single-ended receiver, operating on a voltage-controlled amplitude output, and a differential receiver, providing a balanced voltage output. Its low power consumption and small size make it suitable for even the most power-sensitive applications.

MAX211 consists of one transmitter and one receiver, each with an independent on-board outputs. The receiver has adjustable input sensitivity and a differential sensitivity of typically 75mV when operating at its maximum gain of 100dB. The transmitter has adjustable input sensitivity and a differential sensitivity of typically 75mV when operating at its maximum gain of 100dB. Power consumption for the entire device is typically only 50mW.

The MAX211 IDBRE4 is a fully integrated driver-receiver-transceiver IC, providing a simple and cost-effective solution for applications requiring a one-chip solution. This IC is designed for active serial synchronous transmission and reception of data over a standard 4-wire bus. It features two independent data paths that allow simultaneous asynchronous transmission and reception.

The MAX211 IDBRE4 provides a variety of interface solutions, allowing it to be used in a wide range of applications. It features an integrated voltage regulator, so it can be used with either single-ended or differential signal levels. It supports both half-duplex and full-duplex data transfers, depending on the system design. The IC also features programmable mix-and-hold modes for data reception, providing the flexibility required for applications involving high-speed data transfer.

The MAX211 IDBRE4 works with both TTL and memory ICs. It includes six programmable CMOS drivers, giving it the ability to handle up to 16-bit parallel data words. The IC also includes four programmable receivers, which provide the ability to receive up to 16-bit parallel data words. And lastly, it includes EEPROM for storing configuration settings and custom program codes.

The working principle of the MAX211 IDBRE4 is very simple. When the system is enabled, it reads in the inputs and uses an internal comparator to determine whether or not the data needs to be transmitted or received. If the system is in transmit mode, the data is sent on the bus. If the system is in receive mode, the data is received from the bus and put into the internal register. The IC then compares the received data with its own internal memory and actuates the logic output accordingly.

In conclusion, the MAX211 IDBRE4 is an extremely versatile and robust device, offering a simple and cost-effective solution for a wide range of data transmission and reception applications. Its low power consumption and small size make it ideal for even the most power-sensitive applications. It includes programmable CMOS drivers, programmable receivers, and EEPROM for storing configuration settings and custom program codes, making it the ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference