MAX2460EAI+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX2460EAI+ is a low-power, 4-channel, serial-data transceiver designed for use in applications such as digital television, digital video, and audio. The device supports four independent, unipolar, digital signalling standards: HDTV, SDTV, Audio, and Video formats while providing a high-speed bi-directional serial data-transport capability. The advanced low-power mode of MAX2460EAI+ enables the power consumption of the device to be drastically reduced when it is not actively in use.

The MAX2460EAI+ is well suited for applications where low power consumption is critical, such as in portable consumer electronic devices. With its integrated, low-power features, the device is designed to reduce system power consumption and heat dissipation.

The MAX2460EAI+ features four independent, single-ended transmitter and receiver channels. Each transmitter is capable of carrying its own serial data stream, with an aggregate data rate of up to 400 Mbps. All four receiver channels are also capable of supporting up to 400 Mbps of data.

The MAX2460EAI+ works in tandem with the user\'s system logic to provide a completely integrated data interface solution. The device requires a controller host, which can be either external or embedded in the device. The host acts as the master of the interface, to control the flow of data, provide clock signals, and control the low-power mode. The MAX2460EAI+ can then be programmed to transfer data in a variety ofbitrates, depending on the system requirements.

The MAX2460EAI+ also features an on-chip register with eight configurable bits that can be used to control the operation of the transceiver. This provides the user with full control over the data transfer rate and low-power mode. In addition, the device has two interrupt pins, which are used to notify the host of data transfer and status changes.

The MAX2460EAI+ can be used in multiple applications, such as digital television, digital video, and audio. The device is designed to provide a high-speed, low-power solution for serial data communication over short distances. Additionally, the device can be used in networking, telecommunications, and consumer electronics applications.

The MAX2460EAI+ has been designed to reduce the power requirements of devices, by utilizing its advanced low-power mode. The device can also be programmed to reduce power consumption further by adjusting the data transfer rate and low-power mode. Additionally, the device\'s integrated, low-power features enable the system power consumption to be drastically reduced when it is not actively in use.

In conclusion, the MAX2460EAI+ is a highly efficient, low-power transceiver, which is designed for a variety of short-distance, serial data communication applications. The device features an on-chip register with eight configurable bits, which can be used to control the operation of the transceiver, and two interrupt pins for notifying the host of data transfer and status changes. The device is well-suited for applications requiring low-power, high-speed data communication, such as digital television, digital video, and audio.

The specific data is subject to PDF, and the above content is for reference