MAX2680EUT+T RF/IF and RFID

Series:	MAX2680
Packaging:	Tape & Reel (TR)
Part Status:	Active
RF Type:	Cellular, ISM, PCS, WLL
Frequency:	400MHz ~ 2.5GHz
Number of Mixers:	1
Gain:	11.6dB
Noise Figure:	11.7dB
Secondary Attributes:	Down Converter
Current - Supply:	5mA
Voltage - Supply:	2.7 V ~ 5.5 V
Package / Case:	SOT-23-6
Supplier Device Package:	SOT-23-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers

The MAX2680EUT+T application field and working principle are two important aspects of RF mixing technology. RF mixers are used to combine two signals or more in a process of mixing or combining. This process is used to convert signals from one frequency range to another.When a signal is mixed in an RF mixer, it is able to transform a signal’s frequency and amplitude. Therefore, the mixer is able to convert the signal from one frequency range to another. The mixer can be used to create a wide range of combinations of signals; it can be used to create multi-channel systems, frequency converters, and RF amplifiers.In order to achieve maximum efficiency in RF mixers, they utilize the “balanced” mixing technique. In this technique, two signals of equal amplitude and opposite phase are measured by two different input ports. By mixing the two signals, a non-linear operation occurs which produces a new signal with unique properties.The MAX2680EUT+T is an example of a flip-flop RF mixer. This type of mixer works by combining two signals and then flipping them in opposite directions. This results in a signal that contains both the sum and difference of the frequencies of the two signals. This is used to simulate a phase-shift in one of the channels.Another type of RF mixer is the diode-ring mixer. This type of mixer uses four equal resistors connected in a ring configuration. This allows the signals to interact, resulting in a signal that contains both the sum and difference of the two frequencies.No matter what type of RF mixer is used, one thing remains constant: a transformer is used to couple the two signals into the mixer, and a DC blocking capacitor is used to keep the DC offset Low. This allows the mixer to process the signals without interference.Finally, the last type of RF mixer is the two rejector mixer. This type of mixer works by rejecting the signals that are higher in amplitude. This is done by introducing a small amount of energy into the mixer and then rejecting the higher amplitude signals. This allows the signals with lower amplitude to pass through the mixer more easily.In conclusion, RF mixers are an integral part of many applications. By understanding the MAX2680EUT+T application field and working principle, one can use these mixers to efficiently and effectively create a wide variety of signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description