MAX281AEWE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX281AEWE+ is a part of the Maxim Integrated Active Interface Filters family, and its application fields and working principles are some of the factors which make this device so appealing. The MAX281AEWE+ is an active low-pass filter integrated circuit, which prevents unwanted signals from passing through. This makes it well-suited for filtering out common mode noise, which can interfere with signals travelling through an interface, or for any other application which requires an active low-pass filter.

The MAX281AEWE+ is a three-pin component, with two input pins and a single output pin. It operates at a supply voltage of 3.3V, and has a wide bandwidth of 0.3Hz to 500MHz. It features a low-pass response with a 0.5dB corner frequency, and a maximum attenuation of 13dB. It has an input impedance of 50 ohms, and a high stability, with an additional temperature coefficient of 0.5ppm/°C.

The operating principle of the MAX281AEWE+ is based on its active filter design. It is general-purpose device that features low power consumption, and is capable of filtering out common-mode noise from high-speed digital signals. The active component in the filter is an operational amplifier, which works by amplifying the current or voltage difference between two inputs. This difference is then filtered using a combination of a resistor and capacitor network, which removes any unwanted frequencies from the signal.

The MAX281AEWE+ active filter is suitable for a variety of applications, from filtering out common-mode interference from digital lines, to general-purpose filtering for other analog signals. It is also useful for preventing EMI interference from passing through an interface, due to its wide bandwidth and low-pass response. It also offers high stability, low power consumption and a low temperature coefficient.

The MAX281AEWE+ active filter is a great choice for applications which require an active filter to reduce common-mode noise or EMI interference. Its wide bandwidth, low-pass response, low power consumption and high stability make it suitable for many different applications, from digital interfacing to analog filtering.

The specific data is subject to PDF, and the above content is for reference