MAX294CWE+T

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Filter Type:	Elliptic, Low Pass Switched Capacitor
Frequency - Cutoff or Center:	25kHz
Number of Filters:	1
Filter Order:	8th
Voltage - Supply:	4.75 V ~ 11 V, ±2.375 V ~ 5.5 V
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	MAX294

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX294CWE+T Application Fields and Working Principle

The MAX294CWE+T is an active filter device with a wide range of applications. It is designed to provide a power supply filtering, filtering of signals, and removal of any noise that is not desired. The device consists of four components: a resistor, a capacitor, an amplifier, and an oscillator.

Resistor

The resistor acts as a voltage divider which is key for providing power and signal filtering. The resistor determines how much voltage passes through the capacitor and how much is blocked. The size of the resistor determines the amount of attenuation, or gain, a device is able to provide.

Capacitor

The capacitor acts as a storage device for energy. It is able to store and release energy, operating over a wide range of frequency and voltage. The capacitor is also important for filtering out any noise, as the capacitors resonate to reduce voltage and current to desired levels.

Amplifier

The amplifier acts as a buffer between the resistor and the oscillator. It is used to amplify the signal, allowing for a wider amplification range. The amplifier is also important for setting gain and voltage/current levels as well as filtering out noise.

Oscillator

The oscillator is the last component of the MAX294CWE+T. The oscillator acts like a clock, providing a steady frequency that allows the other components to work in sync. The exact frequency of the oscillator can be set by the user, and the amplitude can be adjusted accordingly.

Application Fields

The MAX294CWE+T is suitable for a variety of applications, including:

• Signal conditioning and filtering
• Noise reduction and power supply filtering
• High-frequency signal reception
• Motor control circuits
• Analog-to-Digital (A/D) and Digital-to-Analog (D/A) conversion

Working Principle

The working principle of the MAX294CWE+T is based on the design of its four components: the resistor, the capacitor, the amplifier, and the oscillator.The resistor acts as a voltage divider, allowing some voltage to be passed through and some to be blocked. The voltage that passes through is filtered and attenuated or amplified to the desired level, depending on the resistor value.The capacitor stores and releases energy, which is filtered through the resistor. The amount of energy that is stored or released is determined by the frequency of the oscillator.The amplifier is responsible for providing an amplification range which determines the gain of the filter circuit. The amplifier also acts as a buffer between the resistor and the oscillator, providing a delay in signal and voltage changes.The oscillator is the key component of the MAX294CWE+T as it provides a steady frequency to the other components. The frequency and amplitude of the oscillator can be adjusted to provide the desired signal filtering or power supply filtering.All four of the components of the MAX294CWE+T work together in a synchronized manner to provide a range of signal and power supply filtering applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description