MAX3224EETP+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX3224EETP+T is a monolithic, low-power, single-channel, RS-485 / fault-tolerant interface device that provides an integrated ESD-protected transceiver and driver function. This device is specially designed to meet the requirements of data communication systems in harsh environments with high electrical noise levels, and it is ideal for applications such as data logging, security systems, industrial control systems, automotive diagnostics, and others. With a single supply voltage of 3.0V to 5.5V, it works over a wide temperature range of -40°C to 125°C. The device achieves both the low power consumption and the high data rate of up to 10Mbps by means of a dedicated CMOS process.

The MAX3224EETP+T has two operating modes, one for direct drive and a second for fault tolerant operation. In direct-drive mode, the device transmits and receives a data voltage that is within 1.5V of the supply voltage. This allows it to work with a wide range of power supplies and baud rates up to the rated maximum data rate. In fault-tolerant mode, the device is designed to prevent data collisions, and send and receive messages at the correct baud rate, independent of the data rate of the other nodes in the network. The device\'s ESD protection circuitry provides protection against ESD up to 8kV, as well as latch-up immunity.

The MAX3224EETP+T also features built-in fault detection and protection features. It monitors the supply voltage, bus voltage, and device temperature, alerting the user if any of these exceed a set threshold. Additionally, the device includes a fail-safe enable/disable switch which can be used to control the power to the driver. The internal driver has a large output drive current of up to 11mA, and its output can be disabled if the enable/disable switch is set to the disabled position.

The MAX3224EETP+T is easy to use and configure. It has a 4-wire interface, with configurable signal pins for both transmit and receive data, as well as enable and disable. The device features signal enable and disable pins, as well as LEDs that indicate when the bus is active. The device is also equipped with hardware selectable enable/disable and fault tolerant/non-fault tolerant modes.

In summary, the MAX3224EETP+T provides a low-power, single-channel, RS-485 and fault-tolerant interface device that is ideally suited for a variety of data communication applications. It integrates ESD protection, fault detection and protection features, a fail-safe enable/disable switch, and an LED that indicates when the bus is active. It has a 4-wire interface, and is configurable for both transmit and receive data, as well as enable and disable. Additionally, its internal driver has a large output drive current of up to 11mA, making it a robust device for a wide variety of industrial, automotive, and other similar data communications applications.

The specific data is subject to PDF, and the above content is for reference