MAX3227EIDBG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3227EIDBG4 is an RS-232 interface from Maxim Integrated which supports maximum data rates at 15 Mbps. It is ideal for a variety of applications such as industrial equipment, graphics, diagnostic tools, and communication equipment. The MAX3227EIDBG4 is capable of supporting both V.35 and EIA-232 digital communications standards.The MAX3227EIDBG4 is a multi-role device designed to provide both high-speed data rates and wide-voltage support in an economical package. The device is capable of supplying up to 20 mA of continuous output current at 3.0 to 15.0 Volts.The MAX3227EIDBG4 provides excellent electrical performance and has low power dissipation. It also features a slew rate control input which allows the user to program the output level at which the device flips the data and provides a low-noise, RS-232 compatible interface.The MAX3227EIDBG4 also features temperature-compensated circuits controlling the input and output levels and provides 25 dB typical isolation between the TX and RX lines which ensures data integrity. The device also supports a wide range of data rates from 2 Mbps up to 15 Mbps.The MAX3227EIDBG4 is ideal for any RS-232 application and is widely used in industrial, medical, communication, and military systems.The MAX3227EIDBG4 requires a single +3.0V to +15.0V supply, and is specified for temperatures from -40 degrees to +85 degrees C. The device also offers a 50-pin SMT version, with both 16 and 34-lead TSSOP packages available.The device offers a typical power dissipation of 5.3 mW in low-power mode and 12 mW in normal mode. It is also rated for a current draw of 6.9 mA in low-power mode and 11.5 mA in normal mode.The MAX3227EIDBG4 application field and working principle is as follows:The MAX3227EIDBG4 is a three part device that is used to convert digital single-ended/differential TTL/CMOS/RS-422 to RS-232 compatible signals. The device includes three drivers — a receiver and a transmitter. Each driver consist of a differential amplifier, high-speed driver, and a programmable slew rate controller.The driver circuitry is designed to provide the low power flat frequency response characteristic of RS-232. The device provides for two operating modes — low power and normal. The low power (LP) mode provides for reduced power dissipation, while the normal (NM) mode provides for a greater slew rate margin.The device can also be programmed to support a wide range of data rates from 2 Mbps up to 15 Mbps. The voltage levels are also selectable, ranging from 3.0 V to 15 V.The receiver converts the incoming differential or single-ended TTL/CMOS/RS-422 signals to the desired data format and voltage level. The device can also be programmed to power up in the maximum power down (MPD) state to allow for power savings during non-operating times.The transmitter converts the incoming data to the desired voltage level for transmission across the transmission line. The device supports the transmission of both TTL and CMOS data formats.In conclusion, the MAX3227EIDBG4 is a smart, cost-friendly and effective device which is capable of providing high-speed communications at low power dissipation. The device provides excellent electrical performance, temperature compensation, and wide-voltage support at an economical price. Its features make it ideal for any RS-232 application in both industrial and military settings.

The specific data is subject to PDF, and the above content is for reference