MAX3241ECTJ+T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	3/5
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	250kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	32-WFQFN Exposed Pad
Supplier Device Package:	32-TQFN-EP (5x5)
Base Part Number:	MAX3241

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Maxim 3241E is an integrated transceiver/receivers device integrated into a single package. It includes a single driver circuit and two receivers. The device helps to bridge digital logic levels with the 5 V logic family devices and can work with open drain or push-pull logic. It is capable of managing a wide range of asynchronous serial transfer bit rates from DC to 2 Mbps and is available in a 20 pin TSSOP ( thin shrink small outline package) board size which is smaller than the traditional DIP package.The MAX3241ECTJ+T are commonly used for applications such as RS-422, RS-485 and RS-232 communication as its low power logic and excellent transmit and receive capabilities makes it suitable for a wide range of communication applications. It offers several features such as hot insertion protection and is known for its reliability and durability.Working PrincipleThe MAX3241ECTJ+T utilizes a differential bus architecture to manage communication between devices. The system works by the transmitter changing the logical level of the TxD to translate the bits into a serial data stream. On the receiving device, the serial data will convert back to logic levels on the RxD pin. The device includes a comparator, binary latch, and a serial interfacing circuit, to encode and decode data. The receiver converts the communication back to logic levels, the receiver is designed with a single-ended input meaning that only one of the two differential inputs is used for communication. The distance between the two points of communication usually determines the effectiveness of the receivers, with a longer distance meaning that the communication is less reliable.The device also includes a logic block which acts as a translator between the logic levels of the transmitter or receiver and the logic levels used by the 5 V logic family. The logic block ensures that data transmission is sent in the correct format and is successfully received by the destination device.The device can also be used for hot insertion applications which require high-speed switching and data transfer without the need for power cycling. This is due to the device\'s low-power logic which enables it to switch quickly and accurately without relying on the main power source.ConclusionThe MAX3241ECTJ+T are an efficient and cost-effective solution for interfacing between logic levels with the 5V logic family. It provides effective data transmission over longer distances and offers several features such as hot insertion protection. It is suitable for a wide range of asynchronous serial communication applications such as RS-422, RS-485, and RS-232 and is available in a small 20 pin TSSOP board size.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description