MAX4080TASA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4080TASA is an amplifier designed for operation in audio applications, with low distortion and low noise operation. Its relatively compact size, combined with its low-voltage, low-power requirements make it an appealing choice in a wide range of audio applications.

In the realm of linear amplifiers, the MAX4080TASA falls into the umbrella of Instrumentation, OP Amps, and Buffer Amps. An instrumentation amplifier is an amplifier that is designed to take an input signal, amplify it, and return an output. The output is then available to be measured by an instrument such as a digital multimeter. Because of their ability to “grab” small input signals and amplify them to a usable level, instrumentation amplifiers are commonly used in a variety of applications from medical instrumentation and physiologic monitoring to process control and audio systems. The MAX4080TASA has a very low input offset voltage of 0.1mV (Measured at 25°C). This low input bias current is crucial for accurate voltage measurements.

An operational amplifier (known as an “Op Amp”) is an amplifier circuitry used in general purpose circuits, that amplifies the electrical signal from a device to a level necessary for a desired equipment. It is used in a myriad of amplifying and corrective functions applications. The MAX4080TASA has a wide common-mode input range of 4V to 16V, making it more than suitable for use in a variety of different op amp applications.

The MAX4080TASA is also designed for use as a buffer amplifier. It has a low output offset voltage of 0.1mV, making it suitable for use in applications where buffering of the output is required to prevent loading or signal degradation. A typical application of buffer amplifiers is to provide a voltage gain while also acting as an impedance matching amplifier.

In addition to instrumentation, op amp, and buffer amplifier applications, the MAX4080TASA also has many audio applications. This low voltage operational amplifier is optimized for audio applications such as: boosting microphone and line signals, composite video signal processing, tone control, and DC cancellation. The MAX4080TASA has a low noise input impedance of 35 ohms, and an open-loop gain of 130dB.

At its core, the MAX4080TASA is a linear amplifier which uses a signal as an input to amplifies based on a conduction voltage gain. This gain is essentially the signal’s frequency response, from DC (Zero Frequency) to the signal’s maximum frequency. The MAX4080TASA has a -3dB bandwidth of 11Mhz, allowing it to amplify high-frequency signals. The amplifier is linear because it takes the input signal and amplifies it by the same amount across the entire frequency range.

The MAX4080TASA is an improved version of similar amplifiers that have been used for decades in the audio and instrumentation worlds. Its low-voltage, low-power operation and relatively small size makes it a great choice for a variety of applications. The MAX4040TASA is an ideal choice for amplifying audio signals and buffering and amplifying instrumentation signals.

The specific data is subject to PDF, and the above content is for reference