MAX4204ESA

Voltage - Input Offset:	1mV
Base Part Number:	MAX4204
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	±4 V ~ 5.5 V
Current - Output / Channel:	52mA
Current - Supply:	2.2mA
Series:	--
Current - Input Bias:	800nA
-3db Bandwidth:	720MHz
Slew Rate:	4200 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	Buffer
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX4204ESA is a general-purpose, low-power instrumentation amplifier suitable for a wide range of applications. It is designed to be used as a direct-coupled differential gain source or as a low-impedance amplifier, and can provide gains up to 10,000. The device consists of 4 separate amplifiers, each with a gain of between 20 and 100, providing a total gain of up to 10,000. The device operates on a single 3V to 30V supply and is rated to operate over the -40°C to +85°C temperature range.The MAX4204ESA is an ideal choice for precision instrumentation and data acquisition applications. The device includes a slew rate of 1V/us, which allows it to accurately capture fast input signals, and features a low input offset voltage of less than 5µV. The device also has low input bias currents, making it suitable for low-current, ultrasound transducer applications. It can be used to drive loads of up to 1.3kΩ, allowing it to be used in a wide range of amplifier applications.The MAX4204ESA is also highly robust and capable of withstanding high levels of electrical noise and distortion. The device features a wide bandwidth of up to 100kHz, making it suitable for applications that require a wide frequency response. The device is also fully protected against reverse polarity and overvoltage.The MAX4204ESA works by amplifying the difference between its two input signals. The input signals are connected to the inverting and non-inverting amplifier inputs, respectively. The differential signal between the inputs is then amplified by the differential amplifier stage and converted to a single-ended signal. This signal is then further amplified by the three gain stages, providing a total gain of up to 10,000. The output of the gain stages is then further buffered by the output stage, providing a low output impedance and increased signal strength.The MAX4204ESA is an ideal choice for a wide range of applications that require a high-gain, low-impedance instrumentation amplifier. The device offers noise and distortion protection, a low input bias current, and a wide bandwidth, making it suitable for medical, ultrasound, industrial, and data acquisition applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description