MAX4236BEUA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4236BEUA+ is a high-performance low-power instrumentation amplifier designed for strain-gauge transducers (load cells, torque sensors, and pressure transducers) and bridge bridges. With its low-power consumption, wide bandwidth and low offset voltage, the MAX4236BEUA+ is ideal for dynamic strain-gauge measurements and precision measurement applications in systems with low power budgets.

The device supports a wide range of gain settings: 3V/V, 5V/V, 10V/V, 50V/V and 100V/V. Other operating parameters include a CMRR (Common Mode Rejection Ratio) of over 100dB, a maximum output swing of 1V, and an input impedance of 40KΩ. The quasi-complimentary output stage helps reduce the in-band noise of the instrumentation amplifier, providing a low distortion audio signal.

The MAX4236BEUA+ is designed to operate within a voltage range of 2.7V to 5.5V, allowing it to be used in battery-operated or low-energy systems. The device features an on-chip power-down feature, allowing it to draw less than 1μA from a supply voltage of 2.7V when the power is off. The device is also designed with EMI (Electro Magnetic Interference) protection and thermal shutdown.

The working principle of the MAX4236BEUA+ is based on the differential input stage, allowing two outside signals to be amplified with minimal distortion and gain. The differential input stage consists of two op-amps, one which is non-inverting and the other is inverting, connected in series. When there is no applied signal, the op-amps form a voltage divider. With the application of a differential input signal, the divider ratio is modified, and the resulting output is amplified. With this design, the MAX4236BEUA+ is able to accurately amplify very small signals so that they can be measured.

The MAX4236BEUA+ is provided in a SO-8 surface-mount package, making it ideal for applications where board space is at a premium. Additionally, the MAX4236BEUA+ is designed for temperature operation from -40°C to +85°C, making it suitable for use in a variety of environmental conditions.

The wide range of features and small package size make the MAX4236BEUA+ an attractive option for instrumentation applications in hostile environments. The high-performance, low-power capabilities of the device enable it to be used for strain-gauge transducer measurements and bridge bridge measurement systems. This instrumentation amplifier is an excellent choice for low-power dynamic strain-gauge measurements and high-precision measurements in systems with limited power budgets.

The specific data is subject to PDF, and the above content is for reference