MAX4487ASD-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4487ASD-T is a low voltage, low current CMOS amplifier with high input impedance, capable of operating on single-supply voltages starting from as low as 2.7V up to 5.5V, and with the ability to reject input common-mode voltages up to the negative power-supply rail. It is part of the OP Amps, Buffer Amps and Linear - Instrumentation Amplifiers family, specifically in the low voltage low power amplifier variety.

The MAX4487ASD-T features a high input impedance of 10 GΩ and an extremely low input bias current of 500 fA which makes it ideal for biasing transducers and low-level sensors. Other features include rail to rail inputs and outputs and a power-down mode which can reduce the quiescent current draw to less than 1 μA. This makes it the perfect op amp for applications involving photocoupled or remote sensing, low voltage signal buffering, and low power portable systems.

The MAX4487ASD-T is a Low-Voltage, High Impedance CMOS amplifier, specifically designed for use in a wide variety of signal conditioning applications. Its high bandwidth and low noise make it suitable for applications such as signal buffering, level shifting, voltage-to-current conversion, and instrumentation. The high input impedance results in reduced loading on signal sources, while its low input bias current contributes to its excellent common-mode rejection (CMRR) and signal-to-noise ratio (SNR). The amplifier\'s rail-to-rail inputs and outputs eliminate the need for external signal level-shifting circuitry and make it ideal for designers of low-voltage and low-power systems. The power-down mode reduces the quiescent current draw to less than 1μA, making it a suitable candidate for applications where power consumption is critical.

The MAX4487ASD-T is easy to use - simply connect the power supply, input signal, and output load to the corresponding pins. The output pin is a rail-to-rail output, meaning it can output from the positive rail (VCC) to the negative rail (GND). The input signal can be referenced to either or both rails, allowing for single- or dual-rail signals. The CMRR, Gain Bandwidth Product (GBP), and input bias current of the MAX4487ASD-T can be adjusted with the selection of the external resistor network. Additionally, the amplifier can be disabled for power saving or for servicing by connecting the ENABLE pin to GND. Once disabled, the amplifier prevents any voltages being applied to the inputs, preventing any damage to connected components.

In conclusion, the MAX4487ASD-T is an excellent choice for applications where low voltage and low power are of primary importance. It features a wide operating voltage range, high input impedance, rail-to-rail I/O, low input bias currents, and adjustable CMRR, GBP, and quiescent current. With these features, the MAX4487ASD-T is able to provide excellent signal processing without compromising on power budget or overall system efficiency.

The specific data is subject to PDF, and the above content is for reference