MAX4526CUA+T

Switch Time (Ton, Toff) (Max):	--
Base Part Number:	MAX4526
Supplier Device Package:	8-uMAX
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Operating Temperature:	0°C ~ 70°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	13pF
Charge Injection:	1pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±4.5 V ~ 18 V
Voltage - Supply, Single (V+):	4.5 V ~ 36 V
Channel-to-Channel Matching (ΔRon):	500 mOhm
On-State Resistance (Max):	175 Ohm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	2:1
Switch Circuit:	SPDT
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX4526CUA+T

The MAX4526CUA+T is a dual analog switch, multiplexer, and demultiplexer device manufactured by Maxim. It is a single, low-voltage, single-supply IC designed for audio, video, and data signal routing applications. The device can be used in both single-supply (4.75V to 36V) and dual-supply (±4.75V to ±36V) applications.

Applications

The MAX4526CUA+T is a versatile IC that can be used in a variety of applications. It can be used for audio/video switching and routing applications such as consumer electronic audio/video systems, automotive audio/video systems, consumer soundbars and TVs. Additionally, the device can be used for data routing applications such as LAN Ethernet switch, router, and wireless antenna switch.

Features

The MAX4526CUA+T features include low on-resistance, low power consumption (less than 5 mW), and high input impedance. The device also features a low signal-to-noise ratio and a high slew rate for fast switching between input and output signals. The MAX4526CUA+T has two digital control input pins and one digital control output pin, enabling the device to be programmable. In addition, the device features an integrated charge pump that is used to drive the control input pins.

Working Principle

The MAX4526CUA+T is a dual analog switch, multiplexer, and demultiplexer device. It can be used as an analog switch, allowing it to route an input signal to an output signal. The device has two digital control input pins (A1 and A2) and one digital control output pin (OUTPUT). The device is programmed using the control input pins. When the A1 and A2 control pins are in a high logic state, the device will route the input signal to the output signal. When the control pins are in a low logic state, the device will block the signal from being routed to the output. The analog signal is routed through the switch by the action of two complementary MOSFETs. The signal is input through the input pin, and then it is routed to the output pin through either of the two MOSFETs. This is determined by the logic state of the control pins. When the control pins are in a high logic state, one of the MOSFETs will conduct and the signal will be routed to the output pin. When the control pins are in a low logic state, the other MOSFET will conduct and the signal will be blocked from the output. The MAX4526CUA+T can also be used as a multiplexer and demultiplexer. A multiplexer is a device that takes in multiple inputs and selects one of them to be output. A demultiplexer is a device that takes in one input and outputs it to multiple places. The device can be programmed to route the input to one of the multiple outputs.

Conclusion

The MAX4526CUA+T is an advanced single, low-voltage, single-supply IC designed for audio, video, and data signal routing applications. It can be used as an analog switch, multiplexer and demultiplexer. It has two digital control input pins, one digital control output pin, and an integrated charge pump. It features low on-resistance, low power consumption and high input impedance, which make it a suitable device for audio/video switching and routing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description