MAX4592EPE

Switch Time (Ton, Toff) (Max):	80ns, 45ns
Base Part Number:	MAX4592
Supplier Device Package:	16-PDIP
Package / Case:	16-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-85dB @ 10MHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	9pF, 9pF
Charge Injection:	2pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	3 V ~ 16 V
Channel-to-Channel Matching (ΔRon):	500 mOhm
On-State Resistance (Max):	20 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX4592EPE

The MAX4592EPE is an ultra low power SPST switches, single-pole, single-throw (SPST) analog switch along with an integrated charge pump. The switch was designed and built by Maxim Integrated and is used in a variety of applications. This switch is ideal for signals that have a wide bandwidth and operate at up to 28V. The MAX4592EPE consists of two independent channels, each with a low On resistance and very low power consumption (less than 0.5 µA). The MAX4592EPE is a great choice for applications that require a low-power, versatile switch.

Interface - Analog Switches, Multiplexers, Demultiplexers

The MAX4592EPE switch can be classified as an “analog switch”, in the interface of multiplexers, demultiplexers, and other switch devices. A multiplexer is a device that can be used to select between two or more analog or digital input signals. A demultiplexer is the opposite of a multiplexer, and is used to distribute a single input signal to multiple outputs. The MAX4592EPE is an analog switch, and can act as either a multiplexer or a demultiplexer. The switch can be used to route the analog or digital signals of a circuit between components, or to route signals to different locations in a circuit.

Working Principle of MAX4592EPE

The MAX4592EPE switch is a radio frequency (RF) switch that uses a low On Resistance and a charge pump integrated into the switch (a charge pump is a device that shifts voltage from a low voltage to a higher voltage, which eliminates the need for an external positive DC supply). The switch was designed to be used in high-frequency applications, and can be switched on or off with logic control signals. The switch operates with a control voltage between -4V and +4V, and a logic control voltage of 0V and 3V. The On/Off state of the switch is determined by the logic control pin; when the control pin is at 3V, the switch is On, and when the control pin is at 0V, the switch is Off. When the switch is On, it has a very low On-resistance, allowing signals to pass through the switch with minimal attenuation and distortion. The MAX4592E also integrates a charge pump, which is used to shift the control voltage from a negative supply to a higher positive voltage. This ensures that the switch can operate at a wide range of voltages, and eliminates the need for an external positive DC supply. The charge pump operates in the background, so it does not affect the performance of the switch. The MAX4592E also has a dual-channel design, which allows two signals to be switched simultaneously. This can be useful in applications where two signals must be connected, or one signal must be routed to two locations. With the dual-channel design, the analog signal is routed to one channel and the logical control signal is routed to the other channel. The two channels are controlled independently, and the logic voltage required to turn on the switch is synchronized to the analog signal. The dual-channel design also allows the switch to be controlled by a single logic control signal. The logic control signal is routed to one channel, while the analog signal is connected to the other channel. This eliminates the need for two separate control signals, and simplifies the design of the switch.

Conclusion

The MAX4592EPE is an excellent choice for applications that require a low-power, versatile switch. It has a low On resistance, very low power consumption, and a dual-channel design. It has a wide range of control voltages, and eliminates the need for an external positive DC supply. The switch can be used as either a multiplexer or a demultiplexer, and can be controlled by a single logic control signal. The MAX4592EPE is a great choice for applications that require a wide bandwidth and high-frequency switching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description