MAX4651EUE-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4651EUE-T is an analog switch designed for switching signals in applications with high frequency and power and low voltage. This kind of switch is classified as an Interface - Analog Switches, Multiplexers, Demultiplexers, and has many advantages over commonly used mechanical switches. The MAX4651EUE-T features low switching power and excellent linearity, as well as low charge injection and low resistance. The switch is designed to handle a wide range of frequencies and power levels, making it suitable for a variety of applications.

The MAX4651EUE-T is a low cost, low-voltage, single-pole single-throw (SPST) analog switch. It is typically used in place of a mechanical switch, but operates with slower response times and lower step response, making it more suitable for applications that require high frequency performance. The MAX4651EUE-T is available in a small MSOP package, making it ideal for applications where space is a consideration. The switch is capable of switching signals in frequencies up to 200MHz, featuring low on-resistance, low on-capacitance, and low charge-injection. The MAX4651EUE-T switch is designed for switching both AC and DC signals and has CMRR (Common Mode Rejection Ratio) values of –35dB at 200MHz and –50dB at 50MHz.

The MAX4651EUE-T can be used in a wide variety of applications, including signal switching, signal routing, data acquisition systems, audio equipment, and test equipment. The switch can be used for switching between active and inactive signals, for signal gain control, for signal routing, and for data compression. The switch is also suitable for power management applications, such as voltage and current monitoring or control, battery charging/discharging, and fuse disconnection. There are also many potential applications in industrial, medical, and automotive industries.

The working principle of the MAX4651EUE-T is based on an electronic switch design, which uses a FET (Field Effect Transistor) to control the signal flow. The switch is opened and closed by applying either a ground signal to the Enable pin or applying a logic high voltage to the Enable pin. The signal path is disabled when the Enable pin is in the high state, and the signal is enabled when the Enable is in the low state. When the signal is enabled, the signal is routed through the N-Channel FET, which provides signal isolation from the signal source or destination and source or destination resistance. The signal then passes through the signal path and is routed to the output pins.

The MAX4651EUE-T offers a wide range of features, including a wide input voltage range, low leakage current, low charge injection, and low power consumption. The switch has a maximum on-resistance of 0.5Ω and a maximum off-resistance of 1MΩ. The switch has a maximum power rating of 3W and a maximum operating temperature of +85°C. It is ESD sensitive and its housing is rated for IP67. The switch is available in various package types, including SOIC-8, MSOP-8 and DIP-8.

In conclusion, the MAX4651EUE-T is an Interface - Analog Switches, Multiplexers, Demultiplexers, designed for switching signals at high frequency and power and low voltage. The switch features low switching power, excellent linearity, low charge injection and low resistance. The switch has a wide input voltage range, low leakage current and low power consumption. It is suitable for a variety of applications, including signal switching, signal routing, data acquisition systems, audio equipment and test equipment. The switch is available in various package types and has a wide array of features that make it an ideal choice for many industrial, medical and automotive applications.

The specific data is subject to PDF, and the above content is for reference