MAX4754ETE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Maxim MAX4754ETE+T is an analog switch and multiplexer/demultiplexer. It is designed to switch, multiplex, and demultiplex signals between two systems whose signal paths are not compatible. Maxim MAX4754ETE+T is engineered to ensure signal integrity by operating at a high frequency, up to 1 MHz with low signal distortion, noise, crosstalk, and power consumption.

The MAX4754ETE+T is a CMOS switch and multiplexer/demultiplexer that is often used in high data rate applications. It can be used to switch signals from one system to another, allowing for increased data throughput. It can also be used to multiplex digital or analog signals into a single signal, and demultiplex them back when required. The switch has a low quiescent current of only 2.2μA and a low leakage current of less than 1nA.

This analog switch is powered by a single supply voltage of 2.75V-5.25V. It features a typical on-state resistance of 10 ohms as well as a control voltage range of 0V to Vdd. It also has a wide power supply noise immunity range of up to +5V.

The MAX4754ETE+T simplifies the routing of analog and digital signals between multiple systems without the need to change the pinouts or rework the system. Its small size (6.9mm x 4.9mm x 1.6mm) and low power provide a cost-effective solution for many embedded applications.

The switch and multiplexer/demultiplexer also offers protection from ESD, ensuring that no system failure occurs due to sudden electronic shocks. It is also designed to operate reliably under extended temperature range conditions, from -40°C to +85°C.

The MAX4754ETE+T is designed for a wide range of applications, including industrial control systems, consumer electronics, home networking, wireless communications, and automotive systems. Its features make it a suitable choice for data routing applications such as USB-C hubs, analog signal switching, and ultra-low power design.

The working principle of the MAX4754ETE+T is quite simple. When the enable line is driven high, the analog or digital signals are routed through the switch or multiplexed or demultiplexed. When the enable line is driven low, the input is off and the analog and digital signals are not allowed to flow. The MAX4754ETE+T provides low feed-through voltage and is able to control power-supply noise in addition to switching signals.

The MAX4754ETE+T is an advanced analog switch and multiplexer/demultiplexer that provides low on-resistance, low quiescent current, and low power consumption. Its high frequency operation and wide power supply noise immunity make it a suitable choice for applications in industrial, consumer, and automotive systems.

The specific data is subject to PDF, and the above content is for reference