MAX4805ACTJ+

Series:	--
Packaging:	Tray
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	8
Output Type:	--
Slew Rate:	--
-3db Bandwidth:	44MHz
Current - Supply:	--
Voltage - Supply, Single/Dual (±):	--
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	32-WFQFN Exposed Pad
Supplier Device Package:	32-TQFN-EP (5x5)
Base Part Number:	MAX4805

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX4805ACTJ+ is an instrumentation amplifier designed to provide excellent common-mode rejection (CMRR) and supply-voltage rejection (PSRR) performance. It is also designed to allow a wide range of gain configurations up to x2000, while consuming only a small amount of power. This combination makes it well suited for applications where precise measurement of low-level signals is important, such as current measurement or other industrial instrumentation. In this article, we will examine the MAX4805ACTJ+\'s application field and working principle.

Applications

The MAX4805ACTJ+ is an ideal amplifier for a variety of general-purpose and industrial measurement or monitoring applications. The small size of the IC is well suited for small handheld or portable instrumentation applications. Its high CMRR performance makes it useful for low-level current measurement and other low-level signal measurements and readout. It is also suitable for low-level audio and video processing applications where noise and distortion must be kept to a minimum. The low power rating of these amplifiers also makes them well suited for battery-powered instrumentation applications.

Gains & Frequency Response

The MAX4805ACTJ+ is designed to be used with a wide range of gain configurations ranging from x1 to x2000. The maximum bandwidth of the amplifier is 1.6MHz, and the gain-bandwidth product is 3.2MHz. The amplifier also has good frequency response with a low 1dB compression point at 10kHz. This makes it ideal for low-level applications that require precise measurement of low-frequency signals.

Interface & Power Supply

The MAX4805ACTJ+ features an SPI-compatible digital control and status interface for setup and control. The interface allows for gain control, output polarity control and mute control. The amplifier can also be configured for external gain control. The amplifier requires a maximum supply voltage of 5.5V.

Operating Mode

The MAX4805ACTJ+ is designed to operate in two main modes: single-ended and differential. In single-ended mode, the amplifier has a gain from 0dB to +20dB, while in differential mode, the gain ranges from 0dB to +40dB. In either mode, the amplifier features low distortion and a high signal-to-noise (SNR) ratio.

Conclusion

The MAX4805ACTJ+ is an instrumentation amplifier with a wide range of gain configurations and low power consumption. Its high CMRR and PSRR performance make it useful for low-level signal measurement applications, and its low power draw makes it well suited for portable or battery-powered instrumentation. The interface and power supply requirements make it an ideal amplifier for a variety of general-purpose and industrial monitoring applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description