MAX485EESA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX485EESA+ is a popular transceiver used for applications requiring long-distance communication over twisted-pair media. Designed for high transmission speeds and long-distance operation, the MAX485EESA+ facilitates RS485 communication in an industrial setting. This type of transceiver is suitable for use in point-to-point, multi-drop, and wiring topologies. With extended temperature range and RS485 Common Mode noise immunity, the MAX485EESA+ is an ideal solution in automotive and avionic applications.

The MAX485EESA+ is a versatile transceiver. It is a single integrated circuit (IC) containing two separate drivers and two separate receivers. It employs differential signals to reduce Electromagnetic Interference (EMI) and has a common mode operation range of ±7V. Designed to meet the electrical characteristics of the RS422 and RS485 standards, the MAX485EESA+ provides an ideal solution for both serial and parallel data transfer over copper media. The MAX485EESA+ is also available in a surface mount package and provides an improved EMI performance in comparison to the DIP packages.

The MAX485EESA+ has two distinct operating modes, which are Half-Duplex and Full-Duplex. The Half-Duplex mode is the default setting. In this mode, only one of the drivers is enabled at a time and data can be sent in both directions. In Full Duplex mode, both drivers are enabled and data can be transmitted in either direction—either from the transmitting device to the receiving device, or vice versa. This is the preferred mode for point-to-point applications, as it results in faster data transmission over longer distances.

The MAX485EESA+ uses two different types of logic signals to control the drivers: a Receive Data Line (RxD) and a Transmit Data Line (TxD). The RxD signal is used to provide data to the receiver, and the TxD signal is used to send data from the transmitter to the receiver. The signal levels on both the RxD and TxD lines are in TTL logic state, which makes them compatible with many different types of logic circuits. When one of the drivers is enabled, the input logic level on the TxD line is converted to output logic level on the RxD line, allowing data to be transmitted over the bus.

The MAX485EESA+ also contains a Receive Enable/Disable (RE/DE) signal line that acts as an additional control line. This line is disconnected from the driver section when the DE signal is asserted high and the RE signal is asserted low. This enables the receiver to be enabled without requiring the driver to be enabled, allowing it to receive the data without interference from the transmitter. This is especially useful in multi-drop bus applications where all the nodes on the bus are sending and receiving data simultaneously.

The MAX485EESA+ is a cost-effective, reliable solution for RS485 communications. It is designed for operation over extended temperature ranges and is capable of transmitting data up to distances of up to 4000 ft over twisted media. With features such as extended temperature range and EMI immunity, the MAX485EESA+ is the ideal transceiver for a range of applications where reliable communication is required.

The specific data is subject to PDF, and the above content is for reference