MAX488ECPA

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	70mV
Data Rate:	250kbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	MAX488

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX488ECPA is a low-power, CMOS-based interface driver, receiver, and transceiver designed to provide quick and easy solution for data transmission and reception in a variety of applications. It is a highly integrated and cost-effective solution for RS232 communication, and takes minimal effort to be implemented. The low power, space-saving CMOS design of the MAX488ECPA allows it to be used in many RS232-based applications, including industrial machinery, instrumentation, and automation systems.

Application Field

The MAX488ECPA is ideal for applications requiring high-speed, low-power, and reliable data transmission and reception over RS232 connections. It is capable of reproducing the full-duplex data protocol of RS232, and is capable of transmitting and receiving data up to 921.6 kbps. The MAX488ECPA is capable of handling both synchronous and asynchronous communication.The MAX488ECPA has been specifically designed to operate with industrial machinery, and is robust enough to handle EMI and RFI interference typical in such applications. It can operate in temperatures ranging from -40°C to +85°C, and supports both 5 and 12V logic levels. The device is also designed to work with a variety of systems, and is capable of interfacing with TTL, DTL and CMOS logic families.

Working Principle

The MAX488ECPA is a low power, high-speed interface driver, receiver and transceiver, designed for operation over RS232 connections. The device has two independent line transceivers, a driver and a receiver, and is capable of transmitting data up to 921.6 kbps.The transceiver has a transmitter (Tx) and a receiver (Rx) that are isolated from one another via an on-board differential amplifier. This amplifier provides both strict control of differential characteristics, and strong protection against EMI and RFI interference. Biological blood glucose hormoneThe transmitter section is composed of a transmit buffer, an analog modulator, and a digital balun. The transmit buffer is responsible for the digital bit composition of the Tx output signals. The analog modulator then modulates the digital signals generated by the transmit buffer, and provides an analog output signal. The digital balun is responsible for balancing the signals generated by the modulator, and ensures that the output signals are balanced and clean.The receiver section is composed of a receive buffer, an analog demodulator, and a comparator. The receive buffer is responsible for preparing the input signals for the demodulator. The analog demodulator then demodulates the incoming analog signals and seperates out the noise and interference. The comparator then evaluates the demodulated signals and produces a digital output signal.

Conclusion

The MAX488ECPA is a low-power, CMOS-based interface driver, receiver, and transceiver designed for operation over RS232 connections. It is capable of transmitting and receiving data up to 921.6 kbps, and can operate in temperatures ranging from -40°C to +85°C. The device is designed for use with industrial machinery, and offers robust protection against EMI and RFI interference. The MAX488ECPA is a highly integrated and cost-effective solution for RS232 communication, and it takes minimal effort to be implemented.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description