MAX488ECSA+T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	70mV
Data Rate:	250kbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	MAX488

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX488ECSA+T is an application field and working principle interface of drivers, receivers and transceivers. It is an integrated driver and receiver combination that provides an efficient way to communicate with low-voltage differential signals (LVDS). The MAX488ECSA+T reduces system size and cost by removing the need for multiple active components and providing up to 40mA of driven or received current.MAX488ECSA+T can be either a driver or receiver, depending on the setting chosen. When configured as a driver, it is composed of two differential outputs, a low-voltage differential ( LVDS) output, and a high-voltage differential (HVDS) output. When configured as a receiver, it is composed of two differential inputs and an LVDS output. It also has two voltage references, V DD and V DDQ .The MAX488ECSA+T provides superior electrical characteristics that are ideal for driving and receiving low-voltage differential signals. The driver can provide a constant current source of up to 40mA and the receiver can provide a continuous current sink up to 40mA. It is capable of extremely low power dissipation, making it suitable for low voltage applications.The LVDS output of the MAX488ECSA+T is configured as a push-pull output, meaning that it is capable of transmitting binary information such as "1" or "0". The HVDS output works as a binary output and is used to drive high-voltage signals. The receiver is also configured as a push-pull input, meaning that it can receive signals transmitted in the same format as the driver.The LVDS output of the MAX488ECSA+T is differential and works on a voltage swing of only +1.2V to -1.2V, which is much lower than the more common 5V. This helps to reduce power consumption, making it suitable for low power applications.The MAX488ECSA+T is designed to be used in high-speed data transfer applications. It has a propagation delay of only 0.6ns, which is about two to three times faster than competing solutions. Additionally, the operating frequency range of the MAX488ECSA+T is from 12 Mb/s to 80 Mb/s.The MAX488ECSA+T is also capable of providing a wide range of voltage levels, such as 3.3V, 5V, and 12V. This allows it to be used in a wide range of applications, including industrial automation, telecom, medical, and networking.In conclusion, MAX488ECSA+T is an integrated driver and receiver combination that provides an efficient way to communicate with LVDS signals. It is capable of delivering up to 40mA of current and has an extremely low power dissipation, making it suitable for low power applications. The MAX488ECSA+T has a wide operating frequency range and can be used in a variety of applications, including industrial automation, telecom, medical, and networking.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description