MAX492EPA+

Voltage - Input Offset:	200µV
Base Part Number:	MAX492
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 6 V, ±1.35 V ~ 3 V
Current - Output / Channel:	30mA
Current - Supply:	150µA
Series:	--
Current - Input Bias:	25nA
Gain Bandwidth Product:	500kHz
Slew Rate:	0.2 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX492EPA+ is a high-performance, low-power operational amplifier and H-bridge driver that is optimized for high speed and accuracy precision motion control applications such as brushed and brushless DC motor control and robotics. It features a low-voltage power supply, low-noise performance, high slew rate, and high temperature operation, making it ideal for precision motion control applications. The MAX492EPA+ is also capable of driving large loads, making it suitable for driving MOSFETs and other power devices. Additionally, its robust internal design allows it to handle high power loads and severe operating conditions.

Application Field

The MAX492EPA+ is a precision motion control amplifier that is suitable for a wide range of motion control applications including brushed and brushless DC motor control, robotics, servo motors, automotive systems, instrumentation, PLCs, medical and industrial systems. The MAX492EPA+ offers higher frequency response than traditional op-amp controllers, allowing for faster and more accurate control in a wide range of conditions. One of the major advantages of this device is its ability to control large loads and operate in demanding environments. The core feature of the device is its H-Bridge Driver, which permits bidirectional control of large loads. This type of control is especially useful for automotive, industrial and aerospace applications, where the needs for precision motor control are especially high. The MAX492EPA+ also provides excellent power efficiency and low-noise operation. Other features of this device include a thermal management system, an offset voltage input, an adjustable voltage swing output, an adjustable power-on delay, and a low-voltage power supply.The MAX492EPA+ can also be used in multi-motor applications and as part of a motion control system, such as a motion sensor or a line following system. In these applications, the device is used as a differential post-amplifier, amplifying the small signals produced by a motion sensing element.

Working Principle

The MAX492EPA+ consists of two integrated circuits, an operational amplifier (Op-Amp) and an H-Bridge driver. The Op-Amp is used to amplify the input signal from a motion sensing element, such as an encoder or an inductive current sensor. The Op-Amp amplifies the input signal and provides the necessary power for the H-Bridge Driver.The H-Bridge Driver is responsible for the control of a motor and is composed of four transistors – two NPN and two PNP – which permit bidirectional control of large loads. The H-Bridge Driver receives the amplified input signal from the Op-Amp and drives the motor in the desired direction. The MAX492EPA+ also provides several other features, such as a thermal management system, low-noise operation, and adjustable voltage output. Additionally, the device is configurable to be powered with either a single 5V or a dual-voltage supply. The MAX492EPA+ is suitable for a variety of motion control applications and is ideal for high-speed and accuracy precision motion control applications. With its low noise performance, low-voltage power supply and high accuracy, the MAX492EPA+ is a great choice for any application that requires precise motion control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description