MAX5253BEAP

Reference Type:	External
Base Part Number:	MAX5253
Supplier Device Package:	20-SSOP
Package / Case:	20-SSOP (0.209", 5.30mm Width)
Operating Temperature:	-40°C ~ 85°C
Architecture:	R-2R
INL/DNL (LSB):	± 1 (Max), 1 (Max)
Voltage - Supply, Digital:	3 V ~ 3.6 V
Voltage - Supply, Analog:	3 V ~ 3.6 V
Series:	--
Data Interface:	SPI
Differential Output:	No
Output Type:	Voltage - Buffered
Settling Time:	16µs (Typ)
Number of D/A Converters:	4
Number of Bits:	12
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC)Digital to analog converters, or DACs, can be used to convert digital signals into analog signals so they can be read or manipulated by sensory equipment. One type of DAC is the MAX5253BEAP, which offers profound accuracy, stability, and reliability. In this article, we’ll look at the application field and working principle of the MAX5253BEAP.The MAX5253BEAP is a precision eight-bit buffered voltage output DAC. It consists of a 3-wire serial interface, an 8-bit data latch, a precision reference generator, an 8-bit error correction DAC circuit, an LEB buffer, and an externally compensated output buffer. It also has three output voltage scales that can be set from 0 to 2.5V. It features a bipolar input range of ±10V, and a maximum output voltage swing range of 2.0V to 2.1V.The MAX5253BEAP is ideal for applications that require precise control of any type of analog circuit. It can be used to create digital/analog loops or to control analog functions such as motors or actuators. It can also be used in any system that needs to convert a digital signal into an analog signal, such as a motion controller, temperature controller, or light controller.The MAX5253BEAP operates on a logic supply of 10V to 35V, and a single supply of 4V to 20V. It has a logic interface clock frequency up to 50MHz and the maximum output current is 250mA. The reference impedance is 100Ω, which is suitable for most applications. The DAC also offers an output conditioner for high frequency applications.In terms of working principle, the MAX5253BEAP takes the three-wire serial interface as its input, which consists of a clock (CLK), data in (DIN), and load input (L/D) lines. The input data is received through the CLK and DIN pins, which are clocked into an internal 8-bit latch. The load input (L/D) pin checks whether it is a data bit or load command.When the L/D pin is low, the incoming data bits are clocked into the internal 8-bit latch and held until the load input (L/D) pin goes high, at which point the data in the latch is transferred to the DAC output. When the data is transferred, the reference voltage is used to linearize the output voltage. The output voltage is then amplified through an external buffer to provide the required power to drive the external load.The MAX5253BEAP is a very versatile device, which is why it is used in a wide range of applications. Its excellent performance and versatility make it an ideal choice for any application that requires precise control over an analog circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description