MAX5381NEUK+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX5381NEUK+T IC is a digital-to-analog converter (DAC) which uses CMOS technology in a space-saving surface-mount package. It is designed for a wide range of data acquisition, audio and power control applications, as well as a variety of motor control and data acquisition tasks. MAX5381NEUK+T is marketed by Maxim Integrated Design, Inc and intended for design applications over a -40° C to +85° C temperature range.

The MAX5381NEUK+T is an 8-bit DAC converting a parallel 8-bit binary input word into a corresponding analog output voltage. The output voltage is internally scaled to a range between 0 V and 2.7 V and is controlled by an on-board voltage reference. This gives virtually single ended output voltage characteristics with 60 µV LSB linearity and a 1.5 MHz switching frequency.

The digital data inputs are TTL/CMOS compatible and bidirectional. These inputs are tracked by an internal counter requiring only an external enable and latch input to separate data from the enable signal. The MAX5381NEUK+T has a bidirectional serial data pin that can be used to transfer digital data between two devices for CMOS/TTL levels.

The MAX5381NEUK+T\'s on-board application field and working principle is best described with a simple example. When the enable pin is pulled low, the serial data line is enabled, while the latch input is held low. The data is then latched and the output voltage is set to the corresponding value of the 8-bit input word. The output voltage is held steady until the datum line is brought high. The MAX5381NEUK+T implements a “latching on edges” mechanism, which means that any time the edge of the enable signal is detected, the data will be latched and the output voltage adjusted accordingly.

The MAX5381NEUK+T is an ideal choice for data acquisition and digital-to-analog conversion applications due to its low power consumption, high-speed operation, and wide-range of operating temperature environments. For example, it can be used in device prototypes, though its low cost would make it well suited for mass production as well. Its simple yet powerful architecture also makes it suitable for use in industrial motor control applications or audio system applications, where digital logic and analog outputs are needed.

The MAX5381NEUK+T can also be used in many sensor systems, where analog signals are measured and then processed digitally. An example of such an application is in automotive systems, where pressure and temperature sensors are used to detect engine performance. The MAX5381NEUK+T is ideal for these types of applications due to its low-noise operation and wide range of operating temperatures.

In applications where a high resolution DAC is required, the MAX5381NEUK+T is a suitable choice due to its 8-bit resolution and wide range of output voltage. With its low power consumption, it is an ideal solution for low-power, portable applications. The MAX5381NEUK+T is also a viable choice for motor control applications due to its bidirectional data transfer pin, enabling control of multiple motors at the same time.

The MAX5381NEUK+T digital-to-analog converter is a versatile solution for a variety of applications. Its ability to operate over wide temperature ranges makes it ideal for automotive and industrial applications. Its 8-bit resolution and low-power consumption also make it an ideal choice for handheld and portable applications. In addition, its bidirectional data transfer pin and latch control enable multiple data points to be read and controlled simultaneously.

The specific data is subject to PDF, and the above content is for reference