MAX5434LEZT+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital potentiometers are commonly used in various analog and digital applications, such as voltage and current regulation, signal conditioning and control, and automation. The MAX5434LEZT+T belongs to a family of ultra-low-power, low-noise, I2C-controlled, nonvolatile digital potentiometers with a wide operating temperature range. This device has an array of 10 taps, providing easy access to segmented resistance values for higher accuracy, longer travel distance and true two-wire control. This digital potentiometer is ideal for applications where low-power consumption, nonvolatility and wide temperature ranges are needed.

The MAX5434LEZT+T is typically used in data acquisition, where its nonvolatile memory registers keep track of the wiper position even after a power cycle, allowing for more accurate control of parameters over long periods of time. It is also used for controlling system parameters such as CPU core voltage, host clock speed and other critical parameters, which require precise and consistent control, especially in harsh environments.

In order to maintain absolute accuracy and precision, the MAX5434LEZT+T employs the I2C bus to program and control the wiper position. The I2C bus is a two-wire, serial communication protocol that facilitates data transfers between two devices, such as the MAX5434LEZT+T and a microcontroller. On the MAX5434LEZT+T side, the I2C bus consists of the serial clock (SCL) and serial data (SDA) lines, which allow the microcontroller to control the wiper position. The microcontroller can then control various system parameters such as voltage, frequency and other critical parameters, as long as it has the necessary hardware I2C connection.

The working principle of the MAX5434LEZT+T is based on a simple concept. Two resistors, connected in parallel, form the segmented resistance network within the device. The wiper arm, connected to the SDA line, is used to select and program the tap resistance. The SCL line is used to Latch the tap selection memory and to set and clear the Wiper position bits associated with each tap. The Wiper position bits that are latched into each of the 10 taps can be programmed and read back by the user.

The MAX5434LEZT+T also employs on-chip EPROM memory, which allows the user to store multiple nonvolatile Wiper configurations. This allows the user to store different wiper configurations for different conditions, such as extreme cold or heat. As it is nonvolatile, the device stores the programmed values even when the power is turned off.

In summary, the MAX5434LEZT+T is a low-power, low-noise, I2C-controlled, nonvolatile digital potentiometer that can be used in data acquisition applications. With its segmented resistance network and nonvolatile memory, the device offers excellent accuracy and precision, making it ideal for applications where environmental conditions or power outages are a concern.

The specific data is subject to PDF, and the above content is for reference