MAX5717GSD+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) can be used to convert digital signals into analog signals. The MAX5717GSD+ is a dual 10-bit unipolar DAC ADC device that supports two 10-bit and two 8-bit unipolar DAC channels. It helps to provide high performance analog signal monitoring and processing while enabling precision analog-to-digital and digital-to-analog conversion.

The MAX5717GSD+ features an on-board serial peripheral interface (SPI) and an LED driver, which together allow for efficient communication between the DAC and other peripheral devices. The device also supports a range of operating temperature ranges, including -40°C to +105°C, -30°C to +85°C, 0°C to +70°C, and +25°C. It is powered by an external +1.8V or +3.3V power supply and operates with a supply voltage range of 1.7V to 3.6V.

The bidirectional I/O pins (Dout/Din) can be used to interface with the SPI bus, whilst the Dout pin can be used to output the DAC data. The R/C pin (Rise/Current) can be used to control the DAC gain and the Enable/Disable pin (EnB/DisB) can be used to enable or disable the DAC. The device also features a reset pin (RST) and a select pin (SEL) to select the DAC channel. The MAX5717GSD+ has a single-pole double-throw (SPDT) output switch to reduce offset between the DAC input and output.

For applications requiring precision and low-noise performance, the MAX5717GSD+ is ideal. It provides a high degree of resolution and accuracy, with a ±1 LSB maximum linearity error and a ±0.1 LSB accuracy. There is also a low-noise profile, with a noise floor as low as -125dBmV. And the power consumption of the device is also low, at 8.3mW in active mode and 0.1mW in shutdown mode.

The MAX5717GSD+ is most commonly used for applications requiring precision analog signal monitoring and processing. Examples include motor control, power management, and industrial motor control, as well as consumer and automotive applications. It is also commonly used in medical imaging and instrumentation, as well as scientific instrumentation. It is compliant with safety-critical industrial standards, as well as AEC-Q100 automotive industry standards.

In summary, the MAX5717GSD+ is a dual 10-bit unipolar DAC ADC device ideal for applications requiring precision and low-noise performance. It provides a high degree of resolution and accuracy, with a ±1 LSB maximum linearity error and a ±0.1 LSB accuracy. It is most commonly used for applications requiring precise analog signal processing, and is commonly used in motor control, power management, industrial motor control, consumer and automotive applications, medical imaging and instrumentation, and scientific instrumentation.

The specific data is subject to PDF, and the above content is for reference