MAX6316LUK46BY-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs) are a type of integrated circuit (IC) that incorporates a variety of power management functions. Supervisors, a subclass of PMICs, are used to monitor signals and system states and detect fault conditions. The Maxim Integrated MAX6316LUK46BY-T is a microprocessor supervisory circuit designed to monitor up to two system power supplies and detect out-of-tolerance conditions of voltage or other system failures or reset failures. This IC is used to ensure stable operation of circuits connected to it to protect against unexpected input voltages and ensure proper sequential power-up and power-down sequencing.

The MAX6316LUK46BY-T microprocessor supervisory circuit operates primarily as an undervoltage-reset (UVR) monitor. It provides two independent voltage monitoring circuit with a typical undervoltage threshold of 3.63V. This UVR monitor prevents the system from running at a voltage that is too low and potentially damaging the system. The MAX6316LUK46BY-T can also stop the system from running at a voltage that is too high, which could lead to excessive current draw and device damage. We can also use the MAX6316LUK46BY-T as an overvoltage-detection (OVD) monitor by setting higher thresholds for overvoltage detection and forcing a reset of the system.

The reset output on the MAX6316LUK46BY-T is an active-low open-drain output driveable with up to 10mA of sink current, giving the option to connect two or more devices together and drive a single active-low reset signal. The reset output is internally debounced to reduce the chance of false reset assertions caused by noise or external system transitions. The MAX6316LUK46BY-T also has an active-low manual reset input which, when asserted, causes the reset output to go low and hold until the reset input is returned to its deasserted state. Power-good and power-fail pins indicate the status of the monitored power supply and can be used to sequence power sequencing or reset peripherals connected to the system.

The MAX6316LUK46BY-T is available in a small, 5-pin SOT23 package and is intended for use in controlling the introduction and removal of power supplies in equipment powered from a variety of power sources. Its wide input voltage range (1.8V to 5.5V) makes the MAX6316LUK46BY-T suitable for use in portable and battery operated devices, as well as in automotive, industrial and medical applications. With its pin-compatible 24-bump UQFN package, it can easily replace the existing MAX6316LUK45 article.

In conclusion, the MAX6316LUK46BY-T Supervisors are an ideal solution in providing system power supply monitoring, ensuring reliable and proper operation in continued support of system functioning. Its wide input voltage range and small package size make it well suited for use in a variety of applications, giving designers the flexibility to choose the best solution for the project at hand.

The specific data is subject to PDF, and the above content is for reference