MAX6378XR40+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX6378XR40+T is a supervisor integrated circuit (IC) used in power management applications. It integrates several monitoring and control functions, including over-voltage (OV) detection and alarm, under-voltage (UV) detection and alarm, and reverse supply (RS)or reversed polarity protection. This versatile IC is a very useful addition to any power monitoring and control system.

The MAX6378XR40+T is a supervisor IC and part of the PMIC - Supervisors category. This IC is designed for analog monitor applications with low-power requirements and a wide operating voltage range. It has an operating temperature range of -40°C to +85°C and works with a power supply voltage in the range of 2.0 V to 5.7 V. The internally-integrated OV, UV and RS detection circuits are designed to protect the system against voltage variations and reversed polarities.

The OV detection circuit monitors continuous voltage levels above a preset threshold to respond to system over-voltage occurrences. Once the preset threshold is reached, the IC can generate an alarm, indicating that the system should immediately shut down and protect itself from the over-voltage. The UV detection circuit is used to monitor the system voltage levels below a preset threshold. It has the same role as the OV detection circuit: to prevent the system from operating below a safe voltage level and to avoid permanent damage.

The reverse supply (RS)or reversed polarity protection circuit is used to prevent the system from operating with a reversed supply voltage. In other words, it detects whether the supply voltage is sourced from the intended power line or from an external source. According to the manufacturer, the MAX6378XR40+T can detect reversed polarities with a voltage difference of up to 3.6 V.

The MAX6378XR40+T also integrates a watchdog timer (WDT) circuit. The WDT has a wide range of timeout periods, from 1 ms to 5 s, and can be set to generate a reset output signal when no activity is detected on the system. The WDT output can be used to perform a power on reset or a system reset. For example, it can act as an independent power monitoring device, used to reset the system in case of a fault or a power failure.

In conclusion, the MAX6378XR40+T is a versatile and feature-rich supervisor IC for power management applications. It integrates several functions, including OV, UV and RS detection to protect the system against voltage variations and reversed polarities, as well as a flexible WDT circuit. This IC is an excellent choice for cost-sensitive designs with low-power requirements and a wide operating temperature range.

The specific data is subject to PDF, and the above content is for reference