MAX6796TPLD3+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Regulator/Supervisor
Number of Voltages Monitored:	1
Output:	Push-Pull, Totem Pole
Reset:	Active Low
Reset Timeout:	35 ms Minimum
Voltage - Threshold:	4.625V, Adj
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	20-WQFN Exposed Pad
Supplier Device Package:	20-TQFN-EP (5x5)
Base Part Number:	MAX6796

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX6796TPLD3+

The MAX6796TPLD3+ is a microprocessor-based supervisory device used in a wide variety of applications. It is designed to provide an efficient means of ensuring that a system is running according to parameters set by the executive software. Its primary purpose is to detect system over- and under-voltage conditions and to send an interrupt signal to the system controller. It can also be used as a watchdog timer to detect system hangs and reset the system.

Application Field of MAX6796TPLD3+

MAX6796TPLD3+ is suitable for a variety of applications such as digital power supplies, point-of-load converters, engine controllers, electrical vehicle charging, solar inverters, and digital signage. The MAX6796TPLD3+ is suitable for a wide range of applications due to its relatively small size and high performance. It is specifically targeted at low power, low voltage applications requiring an efficient power management system. It has the ability to operate at very low voltages (down to 1.7V) and can support a wide input voltage range (2.2V to 6V). The MAX6796TPLD3+ is designed to provide excellent reliability and accuracy while offering a very low on-resistance of 9 mΩ and a very low quiescent current of just 10μA. Its inherent flexibility allows it to easily be adapted to a wide variety of applications including AC-DC and DC-DC power conversion pedagogy.

Working Principle of MAX6796TPLD3+

The MAX6796TPLD3+ is a microprocessor-based supervisory device used in a wide variety of applications. It is designed to monitor the operating condition of a system over time and detect when a fault or malfunction has occurred.The MAX6796TPLD3+ has an internal voltage reference, a voltage comparator, a charge pump counter, and a timer. The voltage reference is used to detect the system node\'s actual voltage, and the voltage comparator compare it to the pre-set voltage levels. When a fault is detected in a system, the device sends an interrupt signal to the processor or a designated Watchdog Timer. The counter and timer are used to perform watchdog timing operations, which are used to detect system hangs, so that the processor can be

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description