MAX688CSA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX688CSA+T is an adjustable, low-dropout voltage linear regulator and supervisor circuit specifically designed to provide local on-card regulation for 5V systems without the need for additional active components. This device is designed to accept a wide input range of 2.65V to 16V and provide a regulated output voltage from 0.8V to 16V adjustable via an external resistor. It has a fast startup time and a low dropout voltage of 175mV when delivering 500mA load current. In addition, it also includes an under-voltage lockout (UVLO) and thermal shutdown for protection.

It integrates logic level detect, enabling the user to select an active logic level from 1.45V to 6V with a single resistor. The chip also includes an integrated ±5V regulator circuit with an output voltage of between 0.8V and 5V adjustable via an external resistor. It provides a low-noise output with a low quiescent current of 4mA (typical).

Furthermore, the MAX688CSA+T also features an adjustable over-current protection (OCP) with a foldback current limiting circuit that limits its output current under overload. The device also integrates a power fail output (PFO) and power-good output (PGO) that signals the state of the regulated power accurately and rapidly to the system. Additionally, it also provides over-temperature protection (OTP) and over-voltage protection (OVP) for system safety.

The MAX688CSA+T can be used for a wide range of applications such as battery-powered products, notebook computers, medical applications, 3G/4G modems, automotive, industrial and consumer applications.

Its working principle is based on the principle of linear regulation, and comprises three main components: an error amplifier, a reference voltage and a pass element (which is typically a transistor). The reference voltage is set by precision resistors and forms the desired output voltage of the regulator. The error amplifier compares the output voltage with the reference and adjusts the drive to the pass element to maintain the voltage setpoint. The error amplifier is designed to provide adequate control loop gain, stability and response time to control the pass element. The pass element acts as an electronic switch, allowing current to flow through the inductor or capacitor to the output when the output voltage is required to increase, and limiting or blocking the current when the output voltage is too high. The pass element is also designed to limit or cut off the current in the event of an overload or a short circuit. The pass element is also protected from thermal runaway through a thermal shutdown circuit.

In summary, the MAX688CSA+T is a highly integrated and low-dropout, adjustable linear voltage regulator with integrated logic level detect, over-current, over-voltage and over-temperature protection and a fast startup time. It is suitable for a wide range of applications, such as battery-powered products, notebook computers, 3G/4G modems and automotive, industrial and consumer applications. Its working principle is based on the linear regulation, and it provides constant output voltage independent of changing load, temperature and input voltage conditions.

The specific data is subject to PDF, and the above content is for reference